Thanks! It compiles... testing in the morning. :) -p
On Mon, May 2, 2016 at 4:24 PM, William Hermans <yyrk...@gmail.com> wrote: > https://groups.google.com/forum/#!searchin/beagleboard/Problemas$20para$20comunicar$20com$20o$20Baud$20Rate$205760/beagleboard/GC0rKe6rM0g/13c1ngXF7owJ > > Read the posts by Peter Hurley > > On Mon, May 2, 2016 at 1:24 PM, Pierce Nichols <pie...@logos-electro.com> > wrote: >> >> Hi all, >> >> I posted this to the Beaglebone list as well, but it seems a bit dead >> so I'm reposting here. >> >> I would like to find a way to set the speed of the UARTs to something >> other than the standard speeds offered by termios. >> >> I'm running a BBB Rev C with Debian 8.3, stock kernel from >> beaglebone.org. I'm using the universal cape and config-pin for setup >> (because it works well enough, so far). I currently have it working >> with a serial speed of 115.2 kbps, but the listener can't handle any >> of the standard termios speeds above that. It can handle 250, 500, or >> 1000 kbps, however. How can I set the BBB UARTs to operate at one of >> those speeds? >> >> -p >> >> PS -- I've considered shifting over to SPI on the next hardware rev, >> but that will be a little bit and I'd like more speed now. >> >> -- >> Pierce Nichols >> Principal Engineer >> Logos Electromechanical, LLC >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/CAENK0Pz5t2FyDi-b42krTfZayFEUB_vBV%2BqqiKKFtz0NKFK0TQ%40mail.gmail.com. >> For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CALHSORr2KC9Aw0wzC_%2BsrBb9pGdZ-HYR%3DyzwBHtW6HWgXW0Pxg%40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. -- Pierce Nichols Principal Engineer Logos Electromechanical, LLC -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAENK0Pw1o1iJ6%2BC%3DcOXZhEPK9h8q4G2z0jN4cjvrVkFNyVmDMw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
