Hello BBB-hackers (and others... :) ) I am trying to understand the various parts that make up the bootprocess and properties that affect booting and flashing. Some questions that I have:
When reading around, I get the impression that an SPL-file named "MLO" should be stored on mmcblk0p1. When mounting it I see no files that even would remotely resamble what I expect. Where should I look? I cant find the big/regular U-Boot img file either. BBB boots fine anyway :/ When booting and connecting a serial to USB to UART0, I read "bad magic" after the "U-Boot SPL 2015-10..." on my stock BBB. Any explaination for this? The BBB boots fine otherwise AFAIK. In an attempt to understand how a fresh am335x-design could be flashed, I installed UniFlash 3.4.1. Powering up BBB (using a USB-cable) with S2 pressed, I expect some noise from the UniFlash (the RNDIS-driver is properly enumerated by windows, has a proper static IP for each instance of the RNDIS'), but I get nothing. The serial wire does sometimes show 8 "C"-letters. Any pointers? I also tried installing openDHCP in hope to find clues to what happens when trying to boot using USB0, but it never seems to lease any IP to the BBB. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cdf9198d-180c-451f-8f6e-84a70de17802%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
