There is an I2C Grove ADC module. That's generally how they expect you to use the analog modules with SeeedStudio BeagleBone Green.
On Thu, Sep 15, 2016 at 1:54 PM Siddharth Amaravadi < siddharth.amarav...@gmail.com> wrote: > Thank you for the information Dennis. Along with the image the program > that he wrote to read the data from the sensor was using I2C, but the > sensor wasn't compatible with I2C and hence I got confused it. > > THank you for the info about the arduino. > > On Thu, Sep 15, 2016 at 4:36 PM, Dennis Lee Bieber <wlfr...@ix.netcom.com> > wrote: > >> On Thu, 15 Sep 2016 03:04:14 +0530, Siddharth Amaravadi >> <siddharth.amarav...@gmail.com> declaimed the >> following: >> >> >Robert, thank you once again, just a small correction I'm using a >> >Beaglebone Black. When I tried referring to the officialpage of seeed >> >studio I found this >> > >> http://wiki.seeedstudio.com/images/thumb/8/8e/Grove_Temperature_Sensor_Hw_connect.jpg/600px-Grove_Temperature_Sensor_Hw_connect.jpg >> > >> >So i connected the Temperature Sensor to the I2C bus. >> > >> >Please correct me if I'm wrong and let me know any other inputs which can >> >solve my problem. >> > >> Based on the image, that red board is an Arduino compatible card. >> As I >> recall, the Arduino multiplexes some lines. >> >> >> https://camo.githubusercontent.com/0174ab1436903eb06dfea280a83c389460637054/68747470733a2f2f7261776769746875622e636f6d2f426f756e692f41726475696e6f2d50696e6f75742f6d61737465722f41726475696e6f253230556e6f253230523325323050696e6f75742e706e67 >> >> Note that SDA/SCL are on the same pins as Analog (ADC) A4 and A5. The >> Grove >> image merely identifies which connector is available for I2C /IF/ you need >> I2C, but otherwise is available as ADC. >> >> -- >> Wulfraed Dennis Lee Bieber AF6VN >> wlfr...@ix.netcom.com HTTP://wlfraed.home.netcom.com/ >> > >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> > You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/7XuXGJjPftQ/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> beagleboard+unsubscr...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/7hvktb9u77rs1o1rm9i2n04l2p8g6ucnnm%404ax.com >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAHc05GQMZcPSNqknvz3nLYqKHatL%3DtOjq01EkhY6AStn2n964w%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAHc05GQMZcPSNqknvz3nLYqKHatL%3DtOjq01EkhY6AStn2n964w%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2BT6QPn2wf-_h7_TbP3AcCR1uUJrswU0nxNfbNT_UPe%3DE2TPVQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.