I am migrating all my stuff to the 2016-11-06 4.4.30-ti-r64 Debian IOT 8.6
image.
I was using the beaglebone-black-make-microSD-flasher-from-eMMC.sh script
back in 2015-11-12 (4.1.12-ti-r29) without a glich and Can't get it working
in the new release. Since I added some stuff to the uEnv.txt file, I tried
the following:
1. dd zero to first 32MB of SDCard
2. Formatted SDCard with SDFormatter on Windows PC
3. Flashed a BBG from the 2016-11-06 4.4.30-ti-r64 Debian IOT 8.6 image.
4. Ran git pull in /opt/scripts
5. Inserted 4GB sdCard
6. Ran /opt/scripts/tools/eMMC/beaglebone-black-eMMC-flasher.sh as root
7. SDCard seems ok, no errors.
8. BBG shuts down after SDCard creation
9. Power-on
10. Here is the complete boot log:
U-Boot SPL 2016.03-00001-gd12d09f (Mar 17 2016 - 16:16:15)
Trying to boot from MMC
bad magic
U-Boot 2016.03-00001-gd12d09f (Mar 17 2016 - 16:16:15 -0500), Build:
jenkins-github_Bootloader-Builder-351
Watchdog enabled
I2C: ready
DRAM: 512 MiB
Reset Source: Global external warm reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
Could not get PHY for cpsw: addr 0
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1301 bytes read in 21 ms (59.6 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.4.30-ti-r64 ...
8644992 bytes read in 500 ms (16.5 MiB/s)
loading /boot/dtbs/4.4.30-ti-r64/am335x-bonegreen.dtb ...
60770 bytes read in 47 ms (1.2 MiB/s)
loading /boot/initrd.img-4.4.30-ti-r64 ...
5228110 bytes read in 310 ms (16.1 MiB/s)
debug: [console=ttyO0,115200n8
root=UUID=106228b0-4b64-44dc-831e-74deb47ba034 ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh] ...
debug: [bootz 0x82000000 0x88080000:4fc64e 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x83e980 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fb03000, end 8ffff64e ... OK
Loading Device Tree to 8faf1000, end 8fb02d61 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.30-ti-r64 (root@a2-imx6q-wandboard-2gb)
(gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Fri Nov 4 21:23:33 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Green
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df918000 s24320 r8192 d20736
u53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8
root=UUID=106228b0-4b64-44dc-831e-74deb47ba034 ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 444752K/522240K available (11361K kernel code, 917K
rwdata, 3796K rodata, 744K init, 907K bss, 28336K reserved, 49152K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0ed58e8 (15159 kB)
[ 0.000000] .init : 0xc0ed6000 - 0xc0f90000 ( 744 kB)
[ 0.000000] .data : 0xc0f90000 - 0xc1075528 ( 918 kB)
[ 0.000000] .bss : 0xc1078000 - 0xc115afa8 ( 908 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000038] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000051] OMAP clocksource: timer1 at 24000000 Hz
[ 0.001340] clocksource_probe: no matching clocksources found
[ 0.001554] Console: colour dummy device 80x30
[ 0.001582] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.001590] This ensures that you still see kernel messages. Please
[ 0.001596] update your kernel commandline.
[ 0.001617] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.046819] pid_max: default: 32768 minimum: 301
[ 0.046971] Security Framework initialized
[ 0.046985] Yama: becoming mindful.
[ 0.047022] AppArmor: AppArmor disabled by boot time parameter
[ 0.047190] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.047202] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.048054] Initializing cgroup subsys io
[ 0.048089] Initializing cgroup subsys memory
[ 0.048134] Initializing cgroup subsys devices
[ 0.048152] Initializing cgroup subsys freezer
[ 0.048169] Initializing cgroup subsys net_cls
[ 0.048183] Initializing cgroup subsys perf_event
[ 0.048197] Initializing cgroup subsys net_prio
[ 0.048222] Initializing cgroup subsys pids
[ 0.048279] CPU: Testing write buffer coherency: ok
[ 0.048338] ftrace: allocating 34628 entries in 102 pages
[ 0.146197] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.146333] Setting up static identity map for 0x80008280 - 0x800082d8
[ 0.150477] Brought up 1 CPUs
[ 0.150502] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.150511] CPU: All CPU(s) started in SVC mode.
[ 0.152256] devtmpfs: initialized
[ 0.172643] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 0.191766] omap_hwmod: debugss: _wait_target_disable failed
[ 0.245662] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.249637] xor: measuring software checksum speed
[ 0.286822] arm4regs : 1194.000 MB/sec
[ 0.326817] 8regs : 1072.000 MB/sec
[ 0.366815] 32regs : 1069.000 MB/sec
[ 0.406815] neon : 1708.000 MB/sec
[ 0.406823] xor: using function: neon (1708.000 MB/sec)
[ 0.406951] pinctrl core: initialized pinctrl subsystem
[ 0.409068] NET: Registered protocol family 16
[ 0.411912] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.413237] cpuidle: using governor ladder
[ 0.413260] cpuidle: using governor menu
[ 0.418797] OMAP GPIO hardware version 0.1
[ 0.430317] No ATAGs?
[ 0.430352] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.431038] omap4_sram_init:Unable to allocate sram needed to handle
errata I688
[ 0.431054] omap4_sram_init:Unable to get sram pool needed to handle
errata I688
[ 0.507061] raid6: int32x1 gen() 230 MB/s
[ 0.574907] raid6: int32x1 xor() 176 MB/s
[ 0.642975] raid6: int32x2 gen() 304 MB/s
[ 0.710972] raid6: int32x2 xor() 199 MB/s
[ 0.778948] raid6: int32x4 gen() 284 MB/s
[ 0.846924] raid6: int32x4 xor() 199 MB/s
[ 0.914939] raid6: int32x8 gen() 282 MB/s
[ 0.982921] raid6: int32x8 xor() 186 MB/s
[ 1.050853] raid6: neonx1 gen() 1461 MB/s
[ 1.118827] raid6: neonx1 xor() 846 MB/s
[ 1.186839] raid6: neonx2 gen() 1886 MB/s
[ 1.254823] raid6: neonx2 xor() 1174 MB/s
[ 1.322815] raid6: neonx4 gen() 1927 MB/s
[ 1.390838] raid6: neonx4 xor() 1205 MB/s
[ 1.458862] raid6: neonx8 gen() 1188 MB/s
[ 1.526814] raid6: neonx8 xor() 844 MB/s
[ 1.526822] raid6: using algorithm neonx4 gen() 1927 MB/s
[ 1.526830] raid6: .... xor() 1205 MB/s, rmw enabled
[ 1.526836] raid6: using intx1 recovery algorithm
[ 1.536052] edma 49000000.edma: TI EDMA DMA engine driver
[ 1.540955] SCSI subsystem initialized
[ 1.541754] usbcore: registered new interface driver usbfs
[ 1.541831] usbcore: registered new interface driver hub
[ 1.541940] usbcore: registered new device driver usb
[ 1.542508] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring
probe
[ 1.542561] omap_i2c 4819c000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring
probe
[ 1.542671] media: Linux media interface: v0.10
[ 1.542733] Linux video capture interface: v2.00
[ 1.542939] pps_core: LinuxPPS API ver. 1 registered
[ 1.542949] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.542977] PTP clock support registered
[ 1.543909] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 1.545324] NetLabel: Initializing
[ 1.545341] NetLabel: domain hash size = 128
[ 1.545347] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.545408] NetLabel: unlabeled traffic allowed by default
[ 1.545768] clocksource: Switched to clocksource timer1
[ 1.657612] NET: Registered protocol family 2
[ 1.658581] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 1.658630] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.658689] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.658771] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.658791] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.659127] NET: Registered protocol family 1
[ 1.659749] RPC: Registered named UNIX socket transport module.
[ 1.659764] RPC: Registered udp transport module.
[ 1.659770] RPC: Registered tcp transport module.
[ 1.659776] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.660424] Unpacking initramfs...
[ 2.042585] Freeing initrd memory: 5108K (cfb03000 - d0000000)
[ 2.043302] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 2.046158] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 2.046287] audit: initializing netlink subsys (disabled)
[ 2.046374] audit: type=2000 audit(1.980:1): initialized
[ 2.056558] zbud: loaded
[ 2.057277] VFS: Disk quotas dquot_6.6.0
[ 2.057539] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 2.060339] NFS: Registering the id_resolver key type
[ 2.060416] Key type id_resolver registered
[ 2.060424] Key type id_legacy registered
[ 2.060452] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.060856] fuse init (API version 7.23)
[ 2.061498] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 2.070212] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 2.070485] io scheduler noop registered
[ 2.070503] io scheduler deadline registered
[ 2.070570] io scheduler cfq registered (default)
[ 2.071925] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
[ 2.073568] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 2.075130] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 2.078464] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[ 2.967404] console [ttyS0] enabled
[ 2.972478] [drm] Initialized drm 1.1.0 20060810
[ 3.029799] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.035973] davinci_mdio 4a101000.mdio: detected phy mask fffffffb
[ 3.042574] davinci_mdio: dt: updated phy_id[2] from phy_mask[fffffffb]
[ 3.056694] libphy: 4a101000.mdio: probed
[ 3.060870] davinci_mdio 4a101000.mdio: phy[2]: device 4a101000.mdio:02,
driver SMSC LAN8710/LAN8720
[ 3.071026] cpsw 4a100000.ethernet: Detected MACID = b0:d5:cc:39:ac:9b
[ 3.077940] cpsw 4a100000.ethernet: cpts: overflow check period 2125
[ 3.086406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.093133] ehci-platform: EHCI generic platform driver
[ 3.098606] ehci-omap: OMAP-EHCI Host Controller driver
[ 3.104281] usbcore: registered new interface driver usb-storage
[ 3.112413] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 3.123464] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 3.132721] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.138623] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned
bus number 1
[ 3.146851] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.153728] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.161006] usb usb1: Product: MUSB HDRC host driver
[ 3.166010] usb usb1: Manufacturer: Linux 4.4.30-ti-r64 musb-hcd
[ 3.172058] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.178203] hub 1-0:1.0: USB hub found
[ 3.182117] hub 1-0:1.0: 1 port detected
[ 3.195400] mousedev: PS/2 mouse device common for all mice
[ 3.203342] omap_rtc 44e3e000.rtc: already running
[ 3.208750] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as
rtc0
[ 3.216675] i2c /dev entries driver
[ 3.221892] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
sec
[ 3.229257] cpuidle: enable-method property 'ti,am3352' found operations
[ 3.236751] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.305242] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 3.314970] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.321428] usbcore: registered new interface driver usbhid
[ 3.327138] usbhid: USB HID core driver
[ 3.331262] mmc0: new high speed SDHC card at address 59b4
[ 3.337133] ashmem: initialized
[ 3.341826] remoteproc0: wkup_m3 is available
[ 3.346328] remoteproc0: Note: remoteproc is still under development
and considered experimental.
[ 3.355344] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and
backward compatibility isn't yet guaranteed.
[ 3.366239] mmcblk0: mmc0:59b4 USD 3.75 GiB
[ 3.372173] mmcblk0: p1
[ 3.380179] NET: Registered protocol family 10
[ 3.388867] mip6: Mobile IPv6
[ 3.392034] NET: Registered protocol family 17
[ 3.396728] Key type dns_resolver registered
[ 3.401126] mpls_gso: MPLS GSO support
[ 3.405244] omap_voltage_late_init: Voltage driver support not added
[ 3.416013] PM: Cannot get wkup_m3_ipc handle
[ 3.420599] ThumbEE CPU extension supported.
[ 3.424943] Registering SWP/SWPB emulation handler
[ 3.430822] registered taskstats version 1
[ 3.435250] zswap: loaded using pool lzo/zbud
[ 3.444006] Btrfs loaded
[ 3.453492] mmc1: MAN_BKOPS_EN bit is not set
[ 3.466155] mmc1: new high speed MMC card at address 0001
[ 3.482081] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB
[ 3.488281] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB
[ 3.494671] Key type encrypted registered
[ 3.500888] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB
[ 3.508394] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 3.519395] mmcblk1: p1
[ 3.543663] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.549668] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.556692] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.564181] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.571650] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.579012] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.586358] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.593328] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 3.600199] remoteproc0: powering up wkup_m3
[ 3.604720] remoteproc0: Booting fw image am335x-pm-firmware.elf, size
217148
[ 3.612284] remoteproc0: remote processor wkup_m3 is now up
[ 3.617982] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version =
0x192
[ 3.629521] bone_capemgr bone_capemgr: Baseboard:
'A335BNLT,BBG1,BBG216083020'
[ 3.636878] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.681779] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.725771] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.769771] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.813771] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.819667] bone_capemgr bone_capemgr: initialized OK.
[ 3.827052] PM: bootloader does not support rtc-only!
[ 3.833263] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01
18:28:43 UTC (946751323)
[ 3.842141] of_cfs_init
[ 3.844724] of_cfs_init: OK
[ 3.854630] Freeing unused kernel memory: 744K (c0ed6000 - c0f90000)
Loading, please wait...
starting version 230
[ 4.184985] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 38 bits of entropy available)
[ 4.207105] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 4.217473] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 38 bits of entropy available)
[ 4.227999] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 4.237706] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 38 bits of entropy available)
[ 4.247869] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 4.263379] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 4.273606] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 4.283678] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 4.293926] random: udevadm: uninitialized urandom read (16 bytes read,
38 bits of entropy available)
[ 6.408848] ti-pruss 4a300000.pruss: creating PRU cores and other child
platform devices
[ 6.527572] irq: no irq domain found for
/ocp/pruss@4a300000/intc@4a320000 !
[ 6.610920] irq: no irq domain found for
/ocp/pruss@4a300000/intc@4a320000 !
[ 6.724584] remoteproc1: 4a334000.pru0 is available
[ 6.729779] remoteproc1: Note: remoteproc is still under development
and considered experimental.
[ 6.738807] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and
backward compatibility isn't yet guaranteed.
[ 7.022770] remoteproc1: Direct firmware load for am335x-pru0-fw failed
with error -2
[ 7.030879] remoteproc1: failed to load am335x-pru0-fw
[ 7.038655] pru-rproc 4a334000.pru0: booting the PRU core manually
[ 7.102566] remoteproc1: powering up 4a334000.pru0
[ 7.159801] remoteproc1: Direct firmware load for am335x-pru0-fw failed
with error -2
[ 7.167927] remoteproc1: request_firmware failed: -2
[ 7.173039] pru-rproc 4a334000.pru0: rproc_boot failed
[ 7.335042] remoteproc1: releasing 4a334000.pru0
[ 7.382202] pru-rproc: probe of 4a334000.pru0 failed with error -2
[ 7.441316] remoteproc1: 4a338000.pru1 is available
[ 7.446470] remoteproc1: Note: remoteproc is still under development
and considered experimental.
[ 7.455500] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and
backward compatibility isn't yet guaranteed.
[ 7.660774] remoteproc1: Direct firmware load for am335x-pru1-fw failed
with error -2
[ 7.668891] remoteproc1: failed to load am335x-pru1-fw
[ 7.676416] pru-rproc 4a338000.pru1: booting the PRU core manually
[ 7.710358] remoteproc1: powering up 4a338000.pru1
[ 7.715578] remoteproc1: Direct firmware load for am335x-pru1-fw failed
with error -2
[ 7.723602] remoteproc1: request_firmware failed: -2
[ 7.728705] pru-rproc 4a338000.pru1: rproc_boot failed
[ 7.734093] remoteproc1: releasing 4a338000.pru1
[ 7.739056] pru-rproc: probe of 4a338000.pru1 failed with error -2
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check file system ... fsck from util-linux 2.25.2
Checking all file systems.
done.
mount: can't find /root in /etc/fstab
done.
Target filesystem doesn't have requested
/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev
failed: No such file or directory
done.
No init found. Try passing init= bootarg.
modprobe: module i8042 not found in modules.dep
modprobe: module ehci-pci not found in modules.dep
modprobe: module ehci-orion not found in modules.dep
modprobe: module uhci-hcd not found in modules.dep
modprobe: module ohci-hcd not found in modules.dep
BusyBox v1.22.1 (Debian 1:1.22.0-9+deb8u1) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
/etc/fstab exists but is empty
(initramfs) ls -l /etc
total 16
-rw-r--r-- 1 0 0 32 Dec 19 2016 e2fsck.conf
-rw-r--r-- 1 0 0 0 Dec 19 2016 fstab
-rw-r--r-- 1 0 0 1830 Dec 19 2016 ld.so.cache
-rw-r--r-- 1 0 0 34 Aug 13 2016 ld.so.conf
drwxr-xr-x 2 0 0 0 Nov 6 2016 ld.so.conf.d
drwxr-xr-x 2 0 0 0 Dec 19 2016 modprobe.d
lrwxrwxrwx 1 0 0 12 Dec 19 2016 mtab ->
/proc/mounts
drwxr-xr-x 2 0 0 0 Dec 19 2016 udev
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/afcf3f4f-21af-4ab5-906d-2bab5351ec1d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
