If the power LED is off, then there is no power to the board. It will not show up as a USB device without power.
Gerald On Sun, Feb 5, 2017 at 9:55 AM, <mic...@cyto365.com> wrote: > It doesn't flashes, no light at all.. during operation it went down. The > BeagleBoard doesn't show up any longer as a hard drive. I connect via the > micro USB port, and that is the only power source for the board. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/2c8815b6-aa0c-4337-a92f-fe44e8408d34%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ gcol...@emprodesign.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BezZ%3DtHoTUdMMbNni_MpoMT_FZnzB8onYcs3Mct-4d3fg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.