On Mon, Feb 27, 2017 at 12:32 PM, Andrew Kirch <[email protected]> wrote:
> you likely don't need an overlay, simply modify /sys at boot to mux the > pins to serial.. > That would take an awful lot of work, and knowledge compared to simply loading an overlay at boot, or interactively from the command line. The overlays already exist too. They're in /lib/firmware The point i was trying to make anyhow, is that it wont work just because you've connected hardware to hardware, and that you need to mux the pins, and load the serial driver module. Which an overlay makes pretty simple. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORqE5GKQUE4MjjKo3fP7KNNihJaa4_aF5d6ZYN_YL%3D9ekg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
