Hello Again, *ESSID: off/any*
*Encryption key: off* *Power management: on* I set up a file to make sure my ESSID and Encryption key were used for setting up WiFi in a *wpa.conf* file. I reset the networking from intit.d and it resets. Then I command the system with *ifup wlan0*. I get a readout of *Unknown interface wlan0*. wlan0 is a Ethernet port for some reason. I have been unable to configure this port to make it a WiFi port. I get no RX bytes and no TX bytes back or in rotation. Seth P.S. On Friday, April 7, 2017 at 8:18:00 PM UTC-5, Mala Dies wrote: > > Hello, > > I am using connmanctl to "try" to get into a valid configuration for WiFi > for a BBBW. I am not successful yet. Does anyone have any pointers? > > Seth > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c917664e-1552-45ec-bef8-337fb9abc9cd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.