Hi, I'm having an issue with connection to my BBBI over USB. I have installed today a new system on the board - Ubuntu 16.04.2 with 4.9.21-ti-rt-r29 kernel. I've been following the steps from here: https://eewiki.net/display/linuxonarm/BeagleBone+Black
Now, that my system is flashed to eMMC and (almost) ready to use, I have a strange issue with USB connection. When I plug in my USB cable and connect host PC with BBB, after ~30s of booting, my host finally gives me an announcement that new wired connection was made. Then when I try "ssh ubuntu@192.168.7.2" connection gets refused... Now the funny thing is that when I plug in an ethernet cable to BBB, after few seconds I can try again with "ssh ubuntu@192.168.7.2" and then it works - until the next boot... I have copied beaglebone-black-g-ether-load.sh script to my beaglebone and am calling it from /etc/rc.local (whose settings I have changed to be called after file system is initialized, not as it was set up previously after network interfaces are up - then I had even worse situation where I have been getting connection timeouts instead of refusal) I'm out of ideas... I'll appreciate every hint. Below some basic commands outputs: ubuntu@arm:~$ uname -a Linux arm 4.9.21-ti-rt-r29 #1 SMP PREEMPT RT Sat Apr 15 00:04:36 CEST 2017 armv7l armv7l armv7l GNU/Linux dmesg https://pastebin.com/FXEn1knE ifconfig https://pastebin.com/5NseyN1P journalctl https://pastebin.com/RhbFPdEa Regards -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/50af7185-a7df-4363-b5e8-0675b29c6b8b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
