Don't you want to load the output generated with debug info not the .bin? I've used a lauterbach emulator to load uboot for source level debugging. You need to point to source tree where you built uboot. If I recall correctly we used a dual boot Ubuntu machine at work. We built in Ubuntu and used CCS in windows and had a mount to a shared partition. At that time uboot debugging was possible in linux but I believe we had the linux drivers for the jtag from either TI or Lauterbach. I think using a virtual machine your gonna have issues
Sent from Yahoo Mail on Android On Wed, Aug 9, 2017 at 8:23 AM, Jeff Andich<jeff.and...@gmail.com> wrote: Hi, We're not yet able to setup Ubuntu native on PC's at work, so we're using Ubuntu under VBOX. I'm attempting to do JTAG debugging via CCS 7.2 to the BB-X15/am572xEVM, but when I run CCS in debug mode under an Ubuntu/VirtualBox, CCS hangs. I'm able to view registers on the A15_0 core, but I haven't been able to successfully load u-boot-spl.bin built in CCS on Ubuntu. When I load, CCS never comes back, and I haven't been able to specify the "load address" for the SPL. From what I understand from reading an older version of TI's CCS wiki, JTAG debugging doesn't work well through a virtual machine. So I'm trying a strange approach: 2, CCS 7.2 installations on the same machine, 1 under the Ubuntu VM to build the SPL in Linux and another under Windows to manage the JTAG debugging process (e.g. load u-boot-spl.bin via JTAG, view memory, step, etc). But I'm having some issues using a Windows/VBOX shared folder to contain the u-boot tree so that both the Windows and Ubuntu CCS's can look at the same tree/project. Has anyone on this forum successfully tried this kind of thing before or are there obvious reasons why this is a bad idea?? I think the person in the following thread may have tried something like this?? https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/117880?tisearch=e2e-quicksearch&keymatch=virtualbox%20shared%20folder I may post up on TI/E2E, but we're working with the BB-X15 image, not the TI SDK image. I'll try to annotate this thread with any useful information that's thrown our way. Thanks!! Jeff -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1437773405.855330.1502313487742%40mail.yahoo.com. For more options, visit https://groups.google.com/d/optout.