Hi, where is your uEnv.txt file?
Regards, Madhu On Tuesday, September 26, 2017 at 1:42:19 PM UTC+5:30, Ashish Maurya wrote: > > This is what I doing... > > U-Boot 2014.04 (Sep 21 2017 - 11:25:07) > > I2C: ready > DRAM: 512 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Net: <ethaddr> not set. Validating first E-fuse MAC > cpsw, usb_ether > Hit any key to stop autoboot: 0 > U-Boot# > U-Boot# fatls mmc 0:1 > 76868 mlo > 329548 u-boot.img > 4964640 uimage > 26024 am335x-boneblack.dtb > system volume information/ > > 4 file(s), 1 dir(s) > > U-Boot# fatload mmc 0:1 0x80600000 uImage > reading uImage > 4964640 bytes read in 1714 ms (2.8 MiB/s) > U-Boot# fatload mmc 0:1 0x80500000 am335x-boneblack.dtb > reading am335x-boneblack.dtb > 26024 bytes read in 19 ms (1.3 MiB/s) > U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw' > U-Boot# print bootargs > bootargs=console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw > U-Boot# bootm 0x80600000 - 0x80500000 > ## Booting kernel from Legacy Image at 80600000 ... > Image Name: Linux-3.12.1-bbb > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4964576 Bytes = 4.7 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 80500000 > Booting using the fdt blob at 0x80500000 > Loading Kernel Image ... OK > Using Device Tree in place at 80500000, end 805095a7 > > Starting kernel ... > > > > This is how I built the images- > Using linux-3.12-bone-black kernel. > make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- zImage modules dtbs > make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage > LOADADDR=0x80008000 > make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- modules_install \ > INSTALL_MOD_PATH=/mnt/rootfs > make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- \ > uImage-dtb.am335x-boneblack LOADADDR=0x80008000 > > SD card has two partitions, first fat and another ext2. First contains > - MLO,u-boot.img,uImage,am335x-boneblack.dtb > second contains rootfs. > > Not getting where I am doing wrong, please help... > Thank You. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1e68c4a8-8d77-41c2-95ff-379e81185874%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.