Hi, I'm running a bare metal software on my BBB. It is started via a special boot-application, a program named "MLO" located on eMMC card which then itself starts my application from microSD card. This is one boot option of the AM3358 and used by default.
Now I tried do to the same with the PocketBeagle, in this case with MLO and my application both on the microSD card - unfortunately it does not work, the application is not started. My question: is there something fundamental different with the Octavo SoC? And is there a serial debug interface available too, similar to the one from the BBB where I can see some messages printed to serial console on boot? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a81a1c93-603e-4e44-9a86-795e8499beec%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
