Hi Ken some time ago I could read the analog inputs with: cape_enable=bone_capemgr.enable_partno=BB-ADC in uEnv.txt But it was another kernel.
Am Sonntag, 3. Dezember 2017 20:07:34 UTC+1 schrieb Ken Shirriff: > I can read analog inputs 0-4 from > /sys/bus/iio/devices/iio:device0/in_voltage*N*_raw but I can't get analog > inputs 5-7 to work. Inputs 5 and 6 don't have analog as a choice in > config-pin: > > $ config-pin -l P1_2 > default gpio gpio_pu gpio_pd pruout pruin > > Analog input 7 (P2_36) doesn't have any other function, but it ignores any > analog input voltage. > > Is there a trick to using inputs 5-7 or is support under development? > > Ken > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d7cecae1-765d-4411-9d7b-8a10be7ac115%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.