On 2/8/2018 2:24 AM, lassyakj...@gmail.com wrote: > Hello Beaglebone experts, > > I would like some basic guidance on how to approach the beaglebone > from the hardware and software point of view. > > Before i start my query list ,let me say that i come from a embedded > hardware background,mostly worked on bare-board projects in close-loop > motor controlled applications,i am relatively new to operating > systems.I have used linux once for my basic networking and file > handling needs two years back. > > I purchased the beagle-bone black to mainly to do two things: > *To familiarize/learn myself with linux and its basics features. > *Learn to interface external hardware with the BBB to perform time > sensitive tasks.(like control a pulse width of an H bridge,PID control > loop corrections). > > Now for the quiry list: > 1.Which version of linux should i run on the BBB.I searched many > forums and the community seemed to have a mixed review between > Debian,mintOS,ubantu and red-hat free edition. Debian seems to be the most up to date OS thanks to Robert Nelson I use it exclusively. > 2.Which programming language is most easiest to use when working with > the BBB.Python,C/C++,Java ? I have mostly used C and assembly,so will > persisting the the same be useful?I found some useful tutorials on the > beagle bone black here <http://www.toptechboy.com/beaglebone-black/> > but it is it is done in Python. Whatever your most comfortable with as all are supported, It's linux after all. > 3.My final end project is to develop an on-grid inverter using the > BBB,so the BBB will act as the main CPU which will interact with the > other peripherals like a slave MCU(via SPI),a PT100 sensor via an i2C > bus,run a 20x4 -8 bit LCD display directly from the Beagle bone > black.I plan to use the dedicated PRU unit of the sitara for some of > these activities. If you try this you need some type of battery backup system to prevent file system corruption. the micro HDMI connector on all of my BBB boards is flaky at best. Your mileage may vary. I am using a i2c display because of this poor choice of connectors. > I would like to know,What are the prerequisites for doing this > project? I know the learning curve for this project is big,but with a > good starting point i am sure i will be able to get out a working > prototype soon. Good luck on your hardware adventures. > > Many thanks, > Arun > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to beagleboard+unsubscr...@googlegroups.com > <mailto:beagleboard+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/d7d54b60-e031-4027-91a0-59f5a8a99ed6%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/d7d54b60-e031-4027-91a0-59f5a8a99ed6%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout.
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e5d0a160-b940-518a-25a6-4aa85a7bff6e%40gmail.com. For more options, visit https://groups.google.com/d/optout.
