Heres the boot log: https://pastebin.com/fgkRkCRv
It seems to say that the I2C busses are set at 100 kHz because "could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins" On Thursday, March 22, 2018 at 2:49:01 AM UTC+13, RobertCNelson wrote: > > On Wed, Mar 21, 2018 at 12:47 AM, <yasir...@gmail.com <javascript:>> > wrote: > > I am having the same issue with my BBB. Modifying the device tree with > > values that should run the I2C clock to 400 kHz does not seem to change > the > > speed upon rebooting. I validated that the .dtb was modified by > unpacking it > > into a .dts again to check if the value was 400 kHz. > > > > Is this method of modifying the device tree not effective anymore in the > > latest images of Debian? > > Check your serial boot log, are you booting what you expect? > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f6740f70-0b6e-47f1-ae01-01e7c9f05d71%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.