hi yesterday i tried to connect the BBB from usb but the connection over internet failed always. I tried to change OS: ManjaroKDE(default), ManjaroGnomeLive, Ubuntu18Live. I tried to change the host connection to internet (from eth to wifi). I tried to put udev rules in /lib/udev/rules.d/73-beaglebone.rules and /lib/udev/rules.d/99-beaglebone.rules. I tried to change manually the setting of the BB usb in ip:192.168.7.2 netmask: 255.255.255.0 gtw: 0.0.0.0 / 192.168.1.1 and i was able to ping the ip but the connection in the browsers (firefox and surf) was refused and also the ssh connection: ssh: connect to host 192.168.7.2 port 22: Connection refused.
this is the ifconfig enp0s20u3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::2ac9:7ec0:9f88:8410 prefixlen 64 scopeid 0x20<link> ether 74:e1:82:78:65:dc txqueuelen 1000 (Ethernet) RX packets 49 bytes 11178 (10.9 KiB) RX errors 3 dropped 0 overruns 0 frame 3 TX packets 2 bytes 469 (469.0 B) TX errors 58 dropped 0 overruns 0 carrier 0 collisions 0 enp5s0f1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 08:62:66:b5:c2:9f txqueuelen 1000 (Ethernet) RX packets 4654 bytes 3256416 (3.1 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4238 bytes 430478 (420.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 43 base 0xd000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 901 bytes 75744 (73.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 901 bytes 75744 (73.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.20.10.2 netmask 255.255.255.240 broadcast 172.20.10.15 inet6 fe80::acdc:d52f:2565:d1 prefixlen 64 scopeid 0x20<link> ether 28:c2:dd:10:7d:6f txqueuelen 1000 (Ethernet) RX packets 1741 bytes 2008158 (1.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1241 bytes 151289 (147.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 how can i solve this problem? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/22469706-1cc7-4474-a76d-eb5f37c7614a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.