> On Jan 4, 2019, at 9:05 AM, sam.abb...@gmail.com wrote: > > Hi Jason, > > I have tried adding "blue-and-red-wiring = "crossed"" in my device tree, but > it doesn't change anything.
If nothing changed, either the flag might be wrong or you have a kernel version that doesn’t support the flag. Can you look for the line that reads the flag in your kernel source? > Is there a way I can look up if my display is RGB565 or BGR565? It is specified which pins to use as part of HDMI, so the framer should just be wired properly. > > Thank you > >> On Friday, January 4, 2019 at 12:02:27 AM UTC-7, Jason Kridner wrote: >> >> >>> On Jan 3, 2019, at 4:01 PM, Robert Nelson <robert...@gmail.com> wrote: >>> >>>> On Thu, Jan 3, 2019 at 3:58 PM <sam.a...@gmail.com> wrote: >>>> >>>> I have the schematics and I followed them to come up with the clone. >>>> Everything on the hardware side seems correct but for some reason I get >>>> inverted red and blue. >>> >>> Which just leaves your hdmi switch connection.. >> >> As I recall, there is a device tree flag to swap the colors. >> >> https://github.com/torvalds/linux/commit/bcc5a6f5fc9f0d53aa896768d6f86d7e64d0b783#diff-05a6dbba7c688e0ffa3e21abe47d7c15 >> >> >> >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to beagleboard...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/CAOCHtYg%2BgHTOghrncOu7Nq6Mm7dCHf2PYgG6yZrjKaAWA%2B%2B%3DYA%40mail.gmail.com. >>> For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/8469a761-26da-4b65-b4af-610264edeb50%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/79975DAE-5A87-49E0-9B2D-9205789F7780%40gmail.com. For more options, visit https://groups.google.com/d/optout.