Thanks for feetback! So it seems to be partially fixed now. Am Montag, 4. März 2019 12:54:23 UTC+1 schrieb Don Pancoe: > > Thank you again. While I was disabling HDMI (both audio and video, just > for good measure) in */boot/uEnv.txt*, I noticed that I had incorrectly > disabled the universal cape earlier. What I did was to change the value > from one to zero as follows... > > ###Cape Universal Enable > enable_uboot_cape_universal=0 > > ...but I should have commented the line out like this... > > ###Cape Universal Enable > #enable_uboot_cape_universal=1 > > So now the *pwm_cap* example is working on both P9_28 and P9_42. >
In earlier kernel versions this didn't work. <https://groups.google.com/d/msg/beagleboard/_A3gbjfChY0/MtMScfKODAAJ> Good luch for your project! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f4de8041-a42a-445d-b2b5-c76902c1f8f9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
