Op maandag 25 februari 2019 18:59:48 UTC+1 schreef TJF: > > Hi Hans! > Hi TJF, thanks for the very quick response.
> > Am Montag, 25. Februar 2019 16:42:07 UTC+1 schrieb Hans Leeuw: >> >> I had exactly the same problem. I commented out the line according to >> your example. I don't know I was supposed to uncomment the bottom line. I >> tried both uncommented and commented... Anyway after reboot I am stuck with >> the same problem. lsmod gives the same output while the /boot/uEnv.txt file >> is modified and the debug information (running 1.c) is the same as well. >> > > I need to know if you're booting from eMMC or uSD and which kernel you > use (uname -r). > Kernel 4.14 .71-ti-r80 Debian 9.8 I have a pocket beagle so I guess that I boot from uSD and I use the cloud9 IDE > > This is the output of the c compiler: >> >> /tmp/ccNSrhGX.o: In function `main': >> 1.c:(.text+0x14): undefined reference to `pruio_new' >> 1.c:(.text+0x28): undefined reference to `pruio_config' >> 1.c:(.text+0x8a): undefined reference to `pruio_destroy' >> collect2: error: ld returned 1 exit status >> <builtin>: recipe for target '1' failed >> make: *** [1] Error 1 >> > > That's a diferent issue. It's not related to the boot process loading > drivers. Instead it's a linker problem. Assuming you installed the > libpruio-dev package, then executing once the command sudo ldconfig > should solve the problem. > I did that but it did not solve anything. > > Regards > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6326b1fb-1cc2-49f7-9c88-64678c306702%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
