Hello Again, One last thing...
... You need to set up your kernel to rt. Real Time kernels are for real time workings, right. So, those guys or guy/lady, whomever, set up the github repo. in my last post, imfatant/test, and it should show a quick image to grab for use. Seth P.S. Um, if I hear from you, nice. If not, that is okay too. I will rummage around some more w/ ideas and quirks until I get this BBB land more familiarized. Yea boy! On Wednesday, September 4, 2019 at 6:02:33 PM UTC-5, todd.c...@gmail.com wrote: > > So I have had nothing but trouble with my two BBBls. I attempted every > walk through I could find on both of them, every time I would get stuck at > a different point before I could ever get to installing ardupilot software. > I finally got fed up with them, bought a Pixhack, combined it with a I.MX6 > scavenged from a 3DR Solo, and went on about my business. Due to a recent > operator > error induced gravitational field incident, the pixhack seems to have > developed dementia as it no longer oriented as to place time or self. > Therefore, I have recently found it necessary to bring the BBBls out of > storage and give them a second chance. > > > *Here is the problem*: both of these little beauties seem to have called > it quits. When I connect them to a computer, any computer (I've tried Win7, > Win10, and Ubuntu 18.something) with any usb cable sometimes the computer > will acknowledge that a device was connected, sometimes it won't. On > windows, when it realizes that a device is there, it tells me that I need > to format the SD card, as if that was the only thing I connected, Linux > machines will let me view the files but that's it. I no longer have the > "Out the box" files that came on the BBBls that used to be there, the ones > with the little picture of the dog and the "getting started" stuff. Where'd > they go? *Can I re-download the factory software somewhere? or is there a > Factory reset option? * > > > The pictures below are included to show the lights that stay on on each > one. > > #1 G,R,75, and the one by the 12v input light up immediately when power is > applied, with or without an SD card, and 0-3 light up sequentially after > about 5 seconds without a card, a little slower with one. > > #2 goes through the same process, but eventually all lights cut off except > the one by the 12v plug and led zero goes into a double blink, pause > pattern; with or without a card. > > [image: BBBLues1.jpg] > > > [image: BBBLues2.jpg] > > When I say "card", I mean one flashed with > "bone-debian-9.5-iot-armhf-2018-10-07-4gb.img.xz" > > I have installed BONE_64 on my PCs > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/edf30fd8-6cda-45e8-8d82-c11abc29c815%40googlegroups.com.
