On Mon, Dec 16, 2019 at 3:58 PM ags <alfred.g.schm...@gmail.com> wrote:
>
> My next question was going to be "what should the EEPROM ID be... or what 
> form should it take"?

An even better, answer, look on side of the board, there is a bar code
with the coded: BWA5***** that's what the device tester was supposed
to write to the eeprom. ;)

> This (non-functioning) BBBW was purchased in Dec 2018 (just now putting it 
> into service). I have another BBBW purchased in Feb 2017 that worked 
> out-of-box (almost... it had a different issue with the "out-of-box 
> configuration" that you also helped me with) and it shows:
>
> eeprom:[A335BNLTBWA51650BBWG0378]
>
> model:[TI_AM335x_BeagleBone_Black_Wireless]
>
>
> So does a "correct" BBB Wireless EEPROM ID follow the A335BNLT BWA51*** 
> BBWG0***] format, with the first wildcard digits some form of version of the 
> wireless chip and the second wildcard digits the board or SoC rev? (spaces 
> mine to separate the different fields)

The first Wild card, is the year in 2 digits and the week in 2 digits.
The last wildcard is incremental units of that week..

BWA5 = BeagleBone Black Wireless

BBWG = BeagleBone Black Wireless, Manufactured by GHI

>
> Finally, was my expectation/understanding incorrect that using /boot/uEnv.txt 
> to override the EEPROM setting and force loading the wireless dtb would also 
> work, without changing the EEPROM? (My thinking was to try that first, then 
> if it worked it would validate the idea the the EEPROM was bad and then 
> reflash the EEPROM).

Well, you did have this old version of u-boot installed to the eMMC:

bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
2016.11-rc3-00002-g73df7f]:[location: dd MBR]

So the overide probably just didn't work..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYhKaQY9dfD2qf66u82RTPn1kc4E9XNKPmu6JcCBWr3P6g%40mail.gmail.com.

Reply via email to