Dear all, I am trying to get my head around the following network issue:
I am fine connecting the Pocketbeagle through USB to my macbook pro using Mojave (10.14.6). As soon though when I turn on internet sharing the connection will probably fall away. I sometimes get the board connected while internet sharing is on, but then the connection will drop out again when I give the command "sudo dhclient usb1". I ping the board and the connection stays active for about 10 seconds (although the console is inactive) and then falls away. This problem occurs both with an updated full image as with a recently installed console image. On my Mac I use a manual configuration with IP Address 192.168.6.1, Subnet Mask: 255.255.255.0 or 255.255.255.252 (fiddling around with these to can make or break the connection) and router address 192.168.6.0 I have managed a few times to keep it connected somehow, but the connection is clearly unstable. It would probably help if I could change the IP-address of the Beagle or at least the subnet mask on the beagle. I hope somebody recognizes this and knows of a solution. Thanks in advance. Best, Hans. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d8711d46-fb22-438e-ac3c-38723de72c2a%40googlegroups.com.