Did you try this using a Windows serial terminal as well?Your fatal error is in linux terminal in virtual machineLet us know if there is a difference and use a powered hub or power supply as was suggested
Sent from Yahoo Mail on Android On Sun, Jul 19, 2020 at 2:54 PM, Rishabh<rishabh.gupta...@gmail.com> wrote: Hi, I am running Ubuntu 18.04 inside a VM using VirtualBox hosted on Windows 10. I am trying to use a PL2303HXA serial to USB cable to get the serial output to my terminal in Ubuntu. I am doing this to view U-Boot. Whenever the serial to USB is connected, the board doesn't boot up. When the serial to USB cable is connected and I run picocom -b 115200 /dev/ttyUSB0 the terminal waits for data on the port. As soon as I try to power up the board with the micro-USB cable, I get a fatal error and the serial port connection gets lost. picocom v2.2 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready FATAL: term closed The board boots up only when the serial to USB cable is disconnected from the PC. I tried to connect the serial to USB after powering up the board and that powers off the board. I am not sure why but the two connections (serial to USB and micro-USB power cable) seem to be mutually exclusive. I would appreciate any suggestions on how to resolve this issue. Thanks,Rishabh -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cbdb43e6-b279-4aa2-aa38-d1a02468e574o%40googlegroups.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1586234867.2880589.1595215261151%40mail.yahoo.com.