That's very clever, but it looks like the file exists before it's usable by libpruio. I tried ConditionPathIsReadWrite, but the file is readwritable before it's usable by libpruio as well. I noticed that the file permissions and group changes which seems to correlate with libpruio being able to use the file. Unfortunately, I don't see anything in the systemd documentation about file owner or permission conditions in service files.
On Thursday, September 10, 2020 at 2:21:02 PM UTC-5 RobertCNelson wrote: > On Thu, Sep 10, 2020 at 1:55 PM Andrew Harres <andrew...@gmail.com> wrote: > > > > Hello again! > > > > I'm trying to solve a minor problem. I made a systemd service which > starts my program automatically. My problem is that my program is starting > too early which causes this error: > > > > AssertionError: pruio_new failed (b'cannot open /dev/uio5') > > > > > > The program will exit and the systemd service will keep restarting the > program until eventually (less than a minute) the program will run > successfully. > > > > Here is my systemd service file: > > > > [Unit] > > After=generic-board-startup.service libpruio-lkm.service > > StartLimitIntervalSec=0 > > > > [Service] > > Type=simple > > Restart=always > > User=debian > > WorkingDirectory=/opt/rad/virtual_sensor > > ExecStart=/opt/rad/virtual_sensor/virtual_sensor > > > > [Install] > > WantedBy=multi-user.target > > > > I realize that since the libpruio-lkm service doesn't exit, putting it > in the 'after' section doesn't really make sense. Surely someone has dealt > with this problem before, but I couldn't find it while searching. > > Add this option to your service: > > ConditionPathExists=/dev/uio5 > > Wish systemd had a wait for module option.. > > Regards, > > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/78f4859b-e23e-4f82-8172-622034ffb23bn%40googlegroups.com.
