On Mon, 18 Jan 2021 07:57:25 -0800 (PST), in
gmane.comp.hardware.beagleboard.user Paul Cotton
<germanbandita-re5jqeeqqe8avxtiumw...@public.gmane.org> wrote:
>I have a second hand BBB and it seems to be setup with bespoke image. I
If it is old enough to be a 2GB eMMC you may find it a problem. That
series shipped with Angstrom as the OS, which hasn't been used in ages.
The Debian IoT image requires a 4GB eMMC to install. There IS a Debian
Console image that may fit in 2GB -- but as the name implies, it is a very
minimal feature set (LXQT images have X-Window desktops, IoT have lots of
stuff except the desktop; I'd hope Console has networking at least <G>).
https://rcn-ee.net/rootfs/bb.org/testing/2021-01-18/
>
>What I have achieved. Made an SD card with a BBB image. Inserted card,
>booted with the button held down and released. Logged in as debian using
>putty with SSH.
>
Note that if you successfully flash a recent Debian image to the eMMC,
you shouldn't need the boot select switch. The board will load u-boot from
eMMC, u-boot will detect an inserted SD card and load device trees and
kernel image from the SD card, and make the SD card the primary file
system.
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/061c0g9lpprk1eet1d2ofka7bnan2nbbg5%404ax.com.
