The setup I use should be correct since this is the one provided by QNX directly (MLO first, u-boot and image). Moreover, if my setup was incorrect, the prebuilt image could not work.
Yes i rebuilt all by following this https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bsp_650InstallationNotes but that does not work Why does it say that I use QNX 6.5.0 (2010) whereas I compile with QNX 6.5.0 SP1 (2012) ? I don't understand, we have been working on this for 3 weeks Le lundi 1 mars 2021 à 19:07:16 UTC+1, robert.sty...@gmail.com a écrit : > I assumed you did rebuild all < > https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Bsp_650InstallationNotes > > > > On Monday, 1 March 2021 at 17:02:25 UTC lazarman wrote: > >> I remember sd card setup was important on Beagle board. your probably >> following old or incorrect instructions. What was on this board could be >> important. What instructions as well. >> They used to have a forum before Blackberry bought them. >> >> >> Sent from Yahoo Mail on Android >> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> >> >> On Mon, Mar 1, 2021 at 10:52 AM, robert.sty...@gmail.com >> <robert.sty...@gmail.com> wrote: >> >> I vaguely remember the SP install being two manual steps, one being >> copying files from one place to another >> >> On Monday, 1 March 2021 at 16:02:15 UTC lucas...@gmail.com wrote: >> >> Hello, >> >> I would like to use QNX on my BeagleBone Black. I have downloaded the QNX >> Neutrino 6.5.0 SP1 BSP here: >> >> >> https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone >> >> When I load the prebuilt image, it starts perfectly but when I try to >> build the BSP by myself, I have this : >> >> *Jumping to QNX* >> >> *System page at phys:80011000 user:fc404000 kern:fc404000* >> *Starting next program at vfe046604* >> *cpu_startnext: cpu0 -> fe046604* >> *VFPv3: fpsid=410330c3* >> *coproc_attach(10): replacing fe07601c with fe0758bc* >> *coproc_attach(11): replacing fe07601c with fe0758bc* >> *Welcome to QNX Neutrino 6.5.0 SP1 on the Texas Instruments BeagleBone >> (ARMv7 Cortex-A8 core) - Board* >> >> *Shutdown[0,0] S/C/F=11/1/11 C/D=fe01c68c/fe099ff4 state(c0)= now lock* >> *QNX Version 6.5.0 Release 2010/07/09-14:26:46EDT* >> *[0]PID-TID=1-6? P/T FL=00019001/05020000 "proc/boot/procnto-instr"* >> *[0]ASPACE PID=2 PF=00008012* >> *armle context[effe8f4c]:* >> *0000: 8ffb2000 8ffb2000 8ffb2c01 00000181 effccbf8 01000000 00000000 >> fc004000* >> *0020: fc004000 effdf47c 01072fff 00000008 00000000 effe8f90 fe046878 >> fe040e0c* >> *0040: 60000013* >> *instruction[fe040e0c]:* >> *06 30 98 e7 1c 20 94 e5 11 00 12 e3 00 70 94 15 18 20 9d 15 07 70 82 11 >> 0c 00* >> *stack[effe8f90]:* >> *0000: effe8fbc e18a1000 00000000 efffb348 effca00c 003fffff 00000a6e >> e1988160* >> *0020: 8ffb2000 fffff000 00000000 00000007 00000040 effccbf8 fe099ff0 >> 01000000* >> *0040: 000000ff efff0090 00000073 0000008d effca6e8 fe044744 effccbf8 >> fe044ad0* >> *0060: efffb348 fe069bac efffb348 fe071e30 effe9018 00000000 00000000 >> 00000000ÿ* >> >> >> As we can see, I have this message : *QNX Version 6.5.0 Release >> 2010/07/09-14:26:46EDT* >> This means that I try to compile with QNX 6.5.0 and not QNX 6.5.0 SP1. I >> don't understand why i have this message because I have well installed QNX >> 6.5.0 SP1 : >> [image: 1.png] >> >> [image: 2.jpg] >> Do I miss something ? Do I have to activate someting somewhere ? >> >> Thank you for your help. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com. >> To view this discussion on the web visit >> >> https://groups.google.com/d/msgid/beagleboard/84dc332e-7fc5-4b20-bf82-05224d394938n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/84dc332e-7fc5-4b20-bf82-05224d394938n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a377588f-8ad6-44b8-a4c1-9c81f4c2eaf9n%40googlegroups.com.