In addition.... I also checked the uart terminal log, its only printing char 'C' on terminal.
On Friday, May 14, 2021 at 9:37:53 AM UTC+9 ASH KR wrote: > Hi, I need some help in booting my board from SD card. > > Since I designed my board (call it BBEv1) based on BBE (beaglebone > enhanced) and even after I tested it with the same image I was running on > BBE/BBB actual board through SD. BBEv1 is not getting boot up from SD. > Since everything is same and exactly as per BBE, I didn't understand the > cause of happening so. > Since there is no ROM code eMMC, it should be by default boot from SD, but > nothing happen. Is this could be the hardware issue or boot image issue? > Please suggest. > Thanks, > /Ash > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2f627395-d04d-454c-ada9-8014dbfe7d39n%40googlegroups.com.