Ok THANK YOU VERY MUCH!! :-) Moinak and Sriram this goes out to you guys
for all your help and assistance!!!!!!!!
Both of you guys get a cyber cookie :-P
The steps I took other then redownload and restart ./install_belenix,
was to do these:
root at NotinoC2200:~# mkdir /opt1
root at NotinoC2200:~# mkdir /opt2
root at NotinoC2200:~# mkdir /opt3
root at NotinoC2200:~# mkdir /opt4
root at NotinoC2200:~#
root at NotinoC2200:~# zfs set mountpoint=/opt1 rpool/ROOT/opensolaris/opt
root at NotinoC2200:~# zfs set mountpoint=/opt2 rpool/ROOT/opensolaris-1/opt
root at NotinoC2200:~# zfs set mountpoint=/opt3 rpool/ROOT/opensolaris-2/opt
root at NotinoC2200:~# zfs set mountpoint=/opt4 rpool/ROOT/opensolaris-3/opt
root at NotinoC2200:~# zfs mount -a
root at NotinoC2200:~# reboot
After initiating:
root at NotinoC2200:~# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 12.3G 48.8G 69.5K /rpool
rpool at install 21K - 67.5K -
rpool/ROOT 11.7G 48.8G 18K legacy
rpool/ROOT at install 0 - 18K -
rpool/ROOT/belenix08 3.77G 48.8G 3.76G legacy
rpool/ROOT/belenix08/opt 3.60M 48.8G 3.60M /opt
rpool/ROOT/opensolaris 1.03G 48.8G 3.43G legacy
rpool/ROOT/opensolaris-1 864M 48.8G 3.64G legacy
rpool/ROOT/opensolaris-1/opt 412M 48.8G 419M /opt
rpool/ROOT/opensolaris-2 744M 48.8G 3.21G legacy
rpool/ROOT/opensolaris-2/opt 3.53M 48.8G 7.13M /opt
rpool/ROOT/opensolaris-3 5.29G 48.8G 3.36G legacy
rpool/ROOT/opensolaris-3 at install 73.1M - 2.31G -
rpool/ROOT/opensolaris-3 at opensolaris-1 205M - 2.45G -
rpool/ROOT/opensolaris-3 at opensolaris-2 166M - 3.10G -
rpool/ROOT/opensolaris-3 at opensolaris-3 26.9M - 3.33G -
rpool/ROOT/opensolaris-3/opt 10.7M 48.8G 7.14M /opt
rpool/ROOT/opensolaris-3/opt at install 0 - 3.66M -
rpool/ROOT/opensolaris-3/opt at opensolaris-1 0 - 3.66M -
rpool/ROOT/opensolaris-3/opt at opensolaris-2 21K - 7.07M -
rpool/ROOT/opensolaris-3/opt at opensolaris-3 21K - 7.07M -
rpool/ROOT/opensolaris/opt 31K 48.8G 3.66M /opt
rpool/export 597M 48.8G 19K /export
rpool/export at install 15K - 19K -
rpool/export/home 597M 48.8G 597M
/export/home
rpool/export/home at install 91K - 154K -
I will also need to edit the /etc/system file too and input exclude: asy
as I'm getting UART errors since I don't have a serial or // port on my
laptop! BTW this is the HD install from that laptop :-) it's upstairs
but I'm ssh'ed into it right now.
Wireless doesn't seem to be working currently:
-bash-3.2# wificonfig -i iwi0 scan
essid bssid type encryption signallevel
00:1a:a1:05:d6:c0 access point wep 12
00:12:a9:60:4e:1e access point wep 9
00:12:a9:28:4f:05 access point wep 8
00:12:a9:58:ba:75 access point wep 7
The Bush 00:22:3f:cf:35:b0 access point wep 5
SKY72563 00:18:4d:43:77:bc access point wep 5
NETGEAR 00:14:6c:7d:5f:6e access point wep 5
jojonhattie 00:90:d0:2a:94:0a access point wep 4
means that the driver is ok and the NIC has firmware but something is
wrong with either the profile I created or something else related to nwam??
The 4 hidden WAP's are mine :-) as can be seen active technical working
knowledge of networking and network equipment :-P LOL - who can guess
the MAC address manufacturer codes??? hahahah sorry I am just really
happy tonight!
I will persist and post my findings!!
Regards,
Kaya
