Dear RFC9251 Co-authors,

Your help with the following questions will be most appreciated,


RFC 9251 seems to assume that the receiving PE will forward:

  1.  (S,G1) traffic only to those host who explicitly sent IGMPv3 report 
(S,G1) and  those who sent IGMPv3 Report (*,G1)
  2.  (*,G1) traffic only to those host who explicitly sent IGMPv3 report 
(*,G1) IGMPv2(G1)
Is this indeed the assumption?

Does it mean that the receiving PE shall do an IP Multicast lookup ? i.e. Has 
MFIB entry with
(S,G1)==> OIF( a, b, c ..) for all local AC ports from which IGMPv3 Report 
(S,G1)  OR
(*,G1)==> OIF( a, b, c ..) for all local AC ports from which IGMPv3 Report 
(*,G1) or IGMPv2 report (G1)

Another issue:
Referring to https://www.rfc-editor.org/rfc/rfc9251.html#name-proxy-querier

It says that "As mentioned in the previous sections, each PE MUST have proxy 
querier functionality for the following reasons:
1.      to enable the collection of EVPN PEs providing Layer 2 Virtual Private 
Network (L2VPN) service to act as a distributed multicast router with an 
anycast IP address for all attached hosts in that subnet
2.      to enable suppression of IGMP Membership Reports and Membership Queries 
over MPLS/IP core"
What shall be the source IP address of the IGMP queries?
Possible Alternatives: 1. The source IP of one of the Routers on the related PE 
BD  (if exists). 2. Some preconfigured dummy IRB Router Anycast IP address ?

Looking forward to getting your response,

Nitsan Dolev Elfassy
Ribbon Communications

Disclaimer

This e-mail together with any attachments may contain information of Ribbon 
Communications Inc. and its Affiliates that is confidential and/or proprietary 
for the sole use of the intended recipient. Any review, disclosure, reliance or 
distribution by others or forwarding without express permission is strictly 
prohibited. If you are not the intended recipient, please notify the sender 
immediately and then delete all copies, including any attachments.
_______________________________________________
BESS mailing list
BESS@ietf.org
https://www.ietf.org/mailman/listinfo/bess

Reply via email to