Felix, That's great news.
I'll have a think to see if I can automate this in anyway - should be possible. Then I'll do a formal release/announcement. In the meantime, if anybody cares to grab the code and test the procedure outlined by Felix please go ahead and report back on this thread. Thanks, R. fcm4711 wrote: > Robin: I've checked out your UDAP-Net tool and here is how you can > configure a SBR using ethernet and DHCP: > > - factory reset SBR > - start UDAP-Net tool > - UDAP> discover > - UDAP> configure 1 > - UDAP> set interface=1 > - UDAP> save_data > - UDAP> reset > - exit UDAP-Net tool > - wait until LED is blue > - start UDAP-Net tool > - UDAP> discover > - UDAP> configure 1 > - UDAP> set squeezecenter_address=<ip> > - UDAP> save_data > - SBR goes to white on its own, no need for a reset > > The reason why I needed to get out of your tool and restart it is > because it seems that you don't pick up the ip address it got via DHCP > and then setting sc_address sets all values (ip, gw, etc.) to 0.0.0.0. > A restart and new discovery picks up this changes. > > If you set squeezecenter_address before the LED is blue you get the > behavior you've been seeing, you need a reset to get SBR to connect and > if SC is stopped the LED stays white. > > So, you'll need to do the two step approach like SBC is doing it. You > should be able to find when SBR is blue with another advanced_discover > call: status = wait_slimserver > > Cheers > Felix > > _______________________________________________ beta mailing list beta@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/beta
