Thanks for the info Jim, much appreciated. That means they are going to be darn hard to come by.
Victor 2008/10/17 jim g <[EMAIL PROTECTED]> > > Just FYI, those bars are the Nitto model 185. I've never seen them > available anywhere else than on a stock RB-1 (not that I've looked). > > > -Jim G > > On Oct 17, 10:23 am, "Victor Anthony" <[EMAIL PROTECTED]> wrote: > > Greetings, > > > > I'd like to buy a pair of handlebars (used or NOS) as spec'd by Grant on > > the Bridgestone RB-1 in the early 90's. I believe they were Nittos with > a > > drop of about 160mm or so but I could be wrong. Regardless of the > > manufacturer, the drop is definitely deeper than that of currently > available > > products (mostly 140mm) as can be seen in these photos > > > > http://www.cyclofiend.com/cc/2006/cc120-kellyp0506.html > > > > http://www.cyclofiend.com/cc/2007/cc314-tonymaldonado0507.html > > > > I need a set that's 44cm measured c-to-c at the bar ends. Any help would > be > > much appreciated. > > > > Cheers, > > > > Victor Anthonyhttp://luggedsteel.blogspot.com > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Bicycle Lifestyle" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/bicyclelifestyle?hl=en -~----------~----~----~----~------~----~------~--~---
