Not an expert here, but I have a loose pair of Nitto bars that are stamped:
Mod.185
440
C P
They do not have the drop of the bars on the RB-1.
I can send pictures if needed, but they do not look at all the same.
David
jim g wrote:
> Just FYI, those bars are the Nitto model 185. I've never seen them
> available anywhere else than on a stock RB-1 (not that I've looked).
>
>
> -Jim G
>
> On Oct 17, 10:23 am, "Victor Anthony" <[EMAIL PROTECTED]> wrote:
>
>> Greetings,
>>
>> I'd like to buy a pair of handlebars (used or NOS) as spec'd by Grant on
>> the Bridgestone RB-1 in the early 90's. I believe they were Nittos with a
>> drop of about 160mm or so but I could be wrong. Regardless of the
>> manufacturer, the drop is definitely deeper than that of currently available
>> products (mostly 140mm) as can be seen in these photos
>>
>> http://www.cyclofiend.com/cc/2006/cc120-kellyp0506.html
>>
>> http://www.cyclofiend.com/cc/2007/cc314-tonymaldonado0507.html
>>
>> I need a set that's 44cm measured c-to-c at the bar ends. Any help would be
>> much appreciated.
>>
>> Cheers,
>>
>> Victor Anthonyhttp://luggedsteel.blogspot.com
>>
> >
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.173 / Virus Database: 270.8.1/1730 - Release Date: 10/17/2008
> 8:07 AM
>
>
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Bicycle Lifestyle" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/bicyclelifestyle?hl=en
-~----------~----~----~----~------~----~------~--~---
