Hello 

It is like below, 


options {
Bla
Bla
Bla
        notify no;
Bla
Bla
bla
}; 


I checked notify messages but in also-notify setting for a specific zone does 
not have any public IP address like 1.1.1.1 or 1.1.1.2...


-----Original Message-----
From: Fuat Demir (Garanti Teknoloji) 
Sent: Wednesday, March 03, 2010 9:28 AM
To: 'Matus UHLAR - fantomas'; bind-users@lists.isc.org
Subject: RE: Notify message from slaves


Hello, 

"Notify no"  statement is in my global conigurations in named.conf under 
options tab. 


-----Original Message-----
From: bind-users-bounces+fuatd=garanti.com...@lists.isc.org 
[mailto:bind-users-bounces+fuatd=garanti.com...@lists.isc.org] On Behalf Of 
Matus UHLAR - fantomas
Sent: Tuesday, March 02, 2010 4:00 PM
To: bind-users@lists.isc.org
Subject: Re: Notify message from slaves

Hello,

please configure your mailer to wrap lines below 80 characters per line.
72 to 75 is usually OK.

Thank you.

On 02.03.10 14:02, Fuat Demir (Garanti Teknoloji) wrote:
> I have 2 slave 1 master server.
> master is located in different subnet from the slaves.
> Lets say, 10.1.1.1 (ns1) and 10.1.1.2 (ns2) are the real ip addresses of the 
> slaves which have public NAT address for allowing queries from internet for 
> authoritive zones. These public address lets say 1.1.1.1 (ns1) and 1.1.1.2 
> (ns2).
> In conf file of slaves i have a statement that "notify no".

where? in the options {} statement? in the view {} statements? Or in the zone 
{} statement for xxx.com?

> When i configured conf file and reconfigure in slaves, i see transfer 
> logs like this,
> 
> in the xfer log of ns1, it says "notify: info: client 1.1.1.2#25998: received 
> notify for zone 'xxx.com'
> 
> in the xfer log of ns2, it says "notify: info: client 1.1.1.1#25998: received 
> notify for zone 'xxx.com'
> 
> Please note that, ns1 recieves notify form the public address of ns2 and ns2 
> recieves notify from the public address of ns1.
> In both slave server, domain names for ns1 and ns2 are the public addresses 
> of itselves.

check all notify settings in config file. Maybe the one you see is not the one 
that applies.
--
Matus UHLAR - fantomas, uh...@fantomas.sk ; http://www.fantomas.sk/
Warning: I wish NOT to receive e-mail advertising to this address.
Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu.
BSE = Mad Cow Desease ... BSA = Mad Software Producents Desease 
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users


This message and attachments are confidential and intended solely for the 
individual(s) stated in this message. If you received this message although you 
are not the addressee, you are responsible to keep the message confidential. 
The sender has no responsibility for the accuracy or correctness of the 
information in the message and its attachments. Our company shall have no 
liability for any changes or late receiving, loss of integrity and 
confidentiality, viruses and any damages caused in anyway to your computer 
system.  

Bu mesaj ve ekleri, mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve 
gizlidir. Bu mesajin muhatabi olmamaniza ragmen tarafiniza ulasmis olmasi 
halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune uyulmasi 
zorunlulugu tarafiniz icin de soz konusudur. Mesaj ve eklerinde yer alan 
bilgilerin dogrulugu ve guncelligi konusunda gonderenin ya da sirketimizin 
herhangi bir sorumlulugu bulunmamaktadir. Sirketimiz mesajin ve bilgilerinin 
size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin 
korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi 
herhangi bir zarardan sorumlu tutulamaz.
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users

Reply via email to