Alex,
We just used one of these Linksys switches in a new install - the switch
can power all 48 ports but only at 1/2 wattage per port.
We had 34 phones deployed and there wasn't an issue with powering all
phones. The issue came in when the switch was restarted and all phones
started up as well, which drew too much power and so a number of phones
choked.
We also had this switch caus a number of UDP packet errors, but that we
are still working through.
Another client uses a Dlink PoE switch and they have been very happy
with it.
HTH
Martin
Alex @ Kovasys Inc. wrote:
Hello
We are doing a client install , and need to get 48 POE switch. We were
considering SRW248G4P (from linksys):
http://www.voipgizmos.com/shopexd.asp?id=444
.. but it only powers up 24 out of 48 ports.
Any other good switches with 48 POE ports out there? Thanks.
P.S. For now we've figured stacking 2 of D-Links (D-Link DES-1228P). 24+24.
--
Alex Kovalenko
877.585.VOIP
514.907.3192 ext. 701
http://www.VoIPGizmos.ca
Canadian VoIP Store
"IP Phones, FXS Adaptors, PBXs,
Digium cards, and more..."
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
