On 30 May 2002 23:16:50 +1200 "Matt Wilson" <[EMAIL PROTECTED]> wrote:
> Some things are, some things aren't, for me - an xterm maximized is > fine, but evolution maximized only snaps to the very top and bottom > edges of the screen - no struts, no left and right edges. > > actually, it seems that anything that doesn't quite fit snug (ie xterm - > uses increments) snaps properly, but anything that does fit snug with > full maximization off only sees (in my case) the top and bottom screen > edges. With full maximization on no snapping occurs. Updated to latest CVS (as of 8:10 AM CDT today). I've found that behaviour changes depending on whether "Full Maximization" is selected or not. Full Maximization off and snap threshold of 10: - Sylpheed v0.7.4 - Maximized snaps to both the struct and the actual display boundaries - Normal snaps to both the struct and the actual display boundaries - Xterm - Maximized snaps to both the struct and the actual display boundaries - Normal snaps to both the struct and the actual display boundaries Full Maximization on and snap threshold of 10: - Sylpheed - Maximized doesn't snap to anything - Normal snaps to actual display boundaries and not to struct - Xterm - Maximized snaps to actual display boundaries and not to struct - Normal snaps to actual display boundaries and not to struct I'm running Dual Head (no Xinerama) with snapping enabled on the first display (the one used for testing) and not enabled on the second display. Both heads are running at 1280x1024 with a depth of 24. In testing, my toolbar was located at bottom center and slit was vertical in the bottom left. If I can provide any more information please let me know. -- Jamin W. Collins
