Hi,
I installed openssh-4.1p1 from blfs-6.1, and I'm having trouble getting
the server to work. I've used the book instructions except not with
static openssl libs or kerberos. Also, I changed the CFLAG in Makefile
from -mcpu=pentium to -march=pentium3. Maybe that's the problem, but
seems unlikely.
Anyway, the server starts OK according to the bootscript, and it even
sits patiently under the daemon mode. Then I try to login and it
crashes with the message Connection closed by 67.160.78.67 before I can
attempt to enter a password or anything.
So I restarted sshd with
root # /usr/sbin/sshd -d -d -d -D
and logged the output. I've attached it because it's rather large.
I then issued the most basic login attempt with high verbosity
dbnichol $ ssh -v -v -v [EMAIL PROTECTED]
(again log attached)
Here's where the daemon goes wrong:
<snip long output>
debug1: userauth-request for user dbnichol service ssh-connection method
keyboard-interactive
debug1: attempt 1 failures 1
debug2: input_userauth_request: try method keyboard-interactive
debug1: keyboard-interactive devs
debug1: auth2_challenge: user=dbnichol devs=
debug1: kbdint_alloc: devices ''
debug2: auth2_challenge_start: devices
Failed keyboard-interactive for dbnichol from 67.160.78.67 port 35571 ssh2
debug3: Normalising mapped IPv4 in IPv6 address
debug3: Trying to reverse map address 67.160.78.67.
debug1: do_cleanup
Which is strange because I'm never offered a chance to use the keyboard
for authentication. Here's what the client says:
<snip>
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
Connection closed by 67.160.78.67
What I think is failing is that sshd is trying to use IPv6 and it's not
gonna happen on my machine (I think). Earlier in the daemon log there
is this message:
debug1: Bind to port 22 on 0.0.0.0.
Bind to port 22 on 0.0.0.0 failed: Address already in use.
That seems like a serious issue to me. And I don't know what would be
using that port besides sshd. (Yes, I checked that there wasn't a
running process already.) I saw on a Googling that someone had a
similar problem with IPv4 and IPv6 trying to use the same address.
Another thing I noticed when I started thinking about IPv6 was to look
at /var/log/sys.log. Here's some things that might be relevant:
Aug 15 04:03:46 conor bootlog: Starting dhclient on the eth0
interface...[ OK ]
Aug 15 04:03:46 conor bootlog: Adding IPv4 address 67.160.78.67 to the
eth0 interface...[ OK ]
Aug 15 04:03:46 conor bootlog: Initializing kernel random number
generator...[ OK ]
Aug 15 04:03:47 conor kernel: NET: Registered protocol family 10
Aug 15 04:03:47 conor kernel: Disabled Privacy Extensions on device
c052eb40(lo)
Aug 15 04:03:47 conor kernel: IPv6 over IPv4 tunneling driver
Aug 15 04:03:47 conor bootlog: Starting SSH Server...[ OK ]
< snip udev creates some devices >
Aug 15 04:03:57 conor kernel: eth0: no IPv6 routers present
Sorry for the long post, but I wasn't sure what would be relevant and
what wouldn't. Thanks in advance to anyone who knows how to address
this problem.
Dan
OpenSSH_4.1p1, OpenSSL 0.9.7g 11 Apr 2005
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to dbnicholson.com [67.160.78.67] port 22.
debug1: Connection established.
debug1: identity file /home/dbnichol/.ssh/identity type -1
debug1: identity file /home/dbnichol/.ssh/id_rsa type -1
debug1: identity file /home/dbnichol/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_4.1
debug1: match: OpenSSH_4.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 138/256
debug2: bits set: 508/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/dbnichol/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 2
debug3: check_host_in_hostfile: filename /home/dbnichol/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 2
debug1: Host 'dbnicholson.com' is known and matches the RSA host key.
debug1: Found key in /home/dbnichol/.ssh/known_hosts:2
debug2: bits set: 526/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/dbnichol/.ssh/identity ((nil))
debug2: key: /home/dbnichol/.ssh/id_rsa ((nil))
debug2: key: /home/dbnichol/.ssh/id_dsa ((nil))
debug1: Authentications that can continue:
publickey,password,keyboard-interactive
debug3: start over, passed a different list
publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/dbnichol/.ssh/identity
debug3: no such identity: /home/dbnichol/.ssh/identity
debug1: Trying private key: /home/dbnichol/.ssh/id_rsa
debug3: no such identity: /home/dbnichol/.ssh/id_rsa
debug1: Trying private key: /home/dbnichol/.ssh/id_dsa
debug3: no such identity: /home/dbnichol/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
Connection closed by 67.160.78.67
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 223
debug2: parse_server_config: config /etc/ssh/sshd_config len 223
debug1: sshd version OpenSSH_4.1p1
debug1: private host key: #0 type 0 RSA1
debug3: Not a RSA1 key file /etc/ssh/ssh_host_rsa_key.
debug1: read PEM private key done: type RSA
debug1: private host key: #1 type 1 RSA
debug3: Not a RSA1 key file /etc/ssh/ssh_host_dsa_key.
debug1: read PEM private key done: type DSA
debug1: private host key: #2 type 2 DSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-d'
debug1: rexec_argv[2]='-d'
debug1: rexec_argv[3]='-d'
debug1: rexec_argv[4]='-D'
debug2: fd 3 setting O_NONBLOCK
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug2: fd 4 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Bind to port 22 on 0.0.0.0 failed: Address already in use.
Generating 768 bit RSA key.
RSA key generation complete.
debug3: fd 4 is not O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug3: send_rexec_state: entering fd = 7 config len 223
debug3: ssh_msg_send: type 0
debug3: send_rexec_state: done
debug1: rexec start in 4 out 4 newsock 4 pipe -1 sock 7
debug1: inetd sockets after dupping: 3, 3
debug3: Normalising mapped IPv4 in IPv6 address
Connection from 67.160.78.67 port 35571
debug1: Client protocol version 2.0; client software version OpenSSH_4.1
debug1: match: OpenSSH_4.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-1.99-OpenSSH_4.1
debug2: fd 3 setting O_NONBLOCK
debug2: Network child is on pid 14123
debug3: preauth child monitor started
debug3: mm_request_receive entering
debug3: privsep user:group 50:50
debug1: permanently_set_uid: 50/50
debug1: list_hostkey_types: ssh-rsa,ssh-dss
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL
PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug3: mm_request_send entering: type 0
debug3: monitor_read: checking request 0
debug3: mm_answer_moduli: got parameters: 1024 1024 8192
debug3: mm_request_send entering: type 1
debug2: monitor_read: 0 used once, disabling now
debug3: mm_request_receive entering
debug3: mm_choose_dh: waiting for MONITOR_ANS_MODULI
debug3: mm_request_receive_expect entering: type 1
debug3: mm_request_receive entering
debug3: mm_choose_dh: remaining 0
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug2: dh_gen_key: priv key bits set: 114/256
debug2: bits set: 526/1024
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug2: bits set: 508/1024
debug3: mm_key_sign entering
debug3: mm_request_send entering: type 4
debug3: monitor_read: checking request 4
debug3: mm_answer_sign
debug3: mm_answer_sign: signature 0x8099b40(143)
debug3: mm_request_send entering: type 5
debug2: monitor_read: 4 used once, disabling now
debug3: mm_request_receive entering
debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN
debug3: mm_request_receive_expect entering: type 5
debug3: mm_request_receive entering
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
debug1: userauth-request for user dbnichol service ssh-connection method none
debug1: attempt 0 failures 0
debug3: mm_getpwnamallow entering
debug3: mm_request_send entering: type 6
debug3: monitor_read: checking request 6
debug3: mm_answer_pwnamallow
debug3: auth_shadow_acctexpired: today 13010 sp_expire -1 days left -13011
debug3: account expiration disabled
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug3: mm_request_receive entering
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM
debug3: mm_request_receive_expect entering: type 7
debug3: mm_request_receive entering
debug2: input_userauth_request: setting up authctxt for dbnichol
debug3: mm_inform_authserv entering
debug3: mm_request_send entering: type 3
debug3: monitor_read: checking request 3
debug3: mm_answer_authserv: service=ssh-connection, style=
debug2: monitor_read: 3 used once, disabling now
debug3: mm_request_receive entering
debug2: input_userauth_request: try method none
debug3: mm_auth_password entering
debug3: mm_request_send entering: type 10
debug3: monitor_read: checking request 10
debug3: mm_answer_authpassword: sending result 0
debug3: mm_request_send entering: type 11
Failed none for dbnichol from 67.160.78.67 port 35571 ssh2
debug3: mm_request_receive entering
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
debug3: mm_request_receive_expect entering: type 11
debug3: mm_request_receive entering
debug3: mm_auth_password: user not authenticated
Failed none for dbnichol from 67.160.78.67 port 35571 ssh2
debug1: userauth-request for user dbnichol service ssh-connection method
keyboard-interactive
debug1: attempt 1 failures 1
debug2: input_userauth_request: try method keyboard-interactive
debug1: keyboard-interactive devs
debug1: auth2_challenge: user=dbnichol devs=
debug1: kbdint_alloc: devices ''
debug2: auth2_challenge_start: devices
Failed keyboard-interactive for dbnichol from 67.160.78.67 port 35571 ssh2
debug3: Normalising mapped IPv4 in IPv6 address
debug3: Trying to reverse map address 67.160.78.67.
debug1: do_cleanup
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
