> Date: Sun, 8 Sep 2013 11:24:40 -0700 (PDT) > From: Sirsendu Roy <xai...@yahoo.com> > To: BLFS Support List <blfs-support@linuxfromscratch.org> > Subject: Re: [blfs-support] Cannot Print document using HP Printer > > Thanks for the reply. > I think I made a step forward after having written you the mail. I have > uninstalled hplip, and then started the web interface for cups again. > > This time cups automatically detected the printer ( I have a HP Deskjet 1050 > All in One). But the guteprint package has no driver for this model. The gute > print has HP Deskjet 1100 driver. So I have chosen this and then added the > printer. Now when I tried to print a test page, first it says "job submitted" > and then after a while job finished. But nothing got printed. > > I gave already installed ghostscript as per the instructions in the BLFS > page. > > Do you think is it because of the driver that it does not print? >
Well, it might and it might not: what does the print-queue show, and what does the error-log show, etc, etc. But the more-central point is that you've again made multiple changes - taking out hplip, and adding both ghostscript and gutenprint - and arrived at another non-working setup. The setup that you had, when you were seeing the "Can't input data to Ghostscript" (or similar) message from the 'lpstat -t -v' output, was pretty likely only missing the presence of ghostscript: i.e. you probably only needed to add ghostscript and it've been all working fine. Note that 'lpstat -t -v' indicated that the correct printer &c was being detected and used. So, I'd recommend you go back to that setup (cups+hplip), plus the presence of ghostscript. Really, do try to debug one thing at a time here. rgds, akh -- -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page