Hi Dale and Barry, I am trying to understand the concept of the jig you have for cutting sheets of plywood with a table saw. I understand the piece of oak or whatever that attaches to the bottom and slides along the groove in the table. I am foggy on the rest. Do you make the jig about the same length as the pieces of plywood you're wanting to cut? I gather that the first or most basic fence is along the side of the stock (parallel to the saw blade) and that you can add a fence at the end if you want. Is this correct? Don't you need the jig to be on both sides of the blade so the stock will lay flat? It seems like having the jig only on the side with the long fence would mean the stock would tilt. Thanks, Ralph
[Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/