Layers of plastic because of so many bags? Why? Can't you reuse the same bag or if it gets crudded up just replace it with a new bag?
----- Original Message ----- From: Roger Bachelder To: blindhandyman@yahoogroups.com Sent: Thursday, August 23, 2007 11:44 Subject: [BlindHandyMan] Painting Question Hi Guys, I've noticed that I've had to do allot of small paint jobs during this project. Meaning, I've had to do allot of small areas at a time. I figure that it is really starting to hit me in the wallet. Is there a device, or some kind of unit that i can purchase, that will make it easier to seal a paint can? I mean do they make such an animal? I'm getting the Pour15 in quart size cans. And i've had to use a Dixie cup to get the liquid out of the can. First you've got to cut the Dixie cup almost in half just to get the dam cup into the can. The can says to thoroughly wipe the can down, then apply a plastic bag in between the can and the lid before sealing. So hear is my dilemma. Because i have to take the lid off the can so many times, i have to put a plastic bag in between each time. Witch In the end result, I'm having a hard time closing the can at all because of so many layers of plastic bags. I need a new tool, Can anyone recommend anything suitable for this problem? I finally put a 3rd layer of paint on the drivers side main rail. I used a foam paint brush. I highly recommend any blind person to use one of these babies. It's blind friendly. Take care Yawl, Roger C Bachelder 3rd [EMAIL PROTECTED] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
