how do i get the oald one off i carn't open the dor?
----- Original Message -----
From: Bob Kennedy
To: blindhandyman@yahoogroups.com
Sent: Saturday, February 27, 2010 11:16 AM
Subject: Re: [BlindHandyMan] ergent help neded
If it isn't working and you can get the old one off, I'd replace it.
----- Original Message -----
From: Carl
To: blindhandyman@yahoogroups.com
Sent: Saturday, February 27, 2010 6:15 AM
Subject: Re: [BlindHandyMan] ergent help neded
i can get the handle off i hav looked to see if thair is any rounding of the
corners on the shaft.
----- Original Message -----
From: Bob Kennedy
To: blindhandyman@yahoogroups.com
Sent: Saturday, February 27, 2010 11:05 AM
Subject: Re: [BlindHandyMan] ergent help neded
Are you able to get to the screws that hold the handle in place? That would
be the easiest way.
Beyond that, you will need to play around and cause the latch to retract
enough to let the door open.
Popping the latch can be a problem depending on your skill level. I have used
old credit cards and butter knives before. I have some thin sheet metal that
works well because it has some spring to it.
As a last resort you can always knock out the hinge pins and lift the door
out of the jam.
----- Original Message -----
From: Carl
To: blindhandyman@yahoogroups.com
Sent: Saturday, February 27, 2010 5:46 AM
Subject: [BlindHandyMan] ergent help neded
i hav a holo cor dor or one of thes egg box cor dors and the dor handle
mechanism is not working i'v chequede that thair is no rounding on the corners
of the rod that coneckts boath sides of the dors handles to the latch and
that's not the problem. how can i get the dor open to remove the latch and
replace iit?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
