Alan,

I could not agree more with you on kids earning money for themselves.

Unfortunately snow in Oklahoma was rare but we made the most of any
opportunity. Now, in Colorado my kids had ample chances to make a little
moola on a weekly basis. (LOL)

cy

 

From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Alan Paganelli
Sent: Saturday, August 07, 2010 3:25 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] "Easy to Assemble! Takes only 20 minutes"

 

  

When I was a kid, you would get one kid sitting in the car driving and 
another kid behind him to push it to the end of the block. Then, you 
swapped places for the return trip. The car was made of metal and raddled 
and vibrated down the sidewalk. You could feel every crack in the sidewalk 
on your butt but nobody cared. We weren't as big a sissies as kids are 
today.

If you turned the wheels more then 45 degrees, you took a spill. Usually, 
it was the last time you did something that stupid.

A cloths pin and an old baseball card turned any 2 wheeler into a motor bike

and if you were really cool, you put one on each of the 2 wheels!

As kids I never even thought of asking my old man for money. I knew what 
he'd say! We got a bucket and another kid with a bucket, you put soap in 
yours and he put water in his and you went banging on neighbors doors 
offering to wash their car for a dollar. You looked for pop bottles and 
filled up your American Flyer Wagon. If you couldn't find pop bottles you 
collected newspapers. We mode grass and raked it up. In the winter, we 
shoveled driveways and sidewalks. A chance of snow meant money in the bank!

You tell a kid today to go out and make his own money and your abusing your 
kid and are some kind of low life parent for not giving it to them. I can't 
say on this list what I think of that. There are ladies present.

Alan

Please click on: http://www.home.earthlink.net/~alanandsuzanne/
There, you'll find files of my arrangements and performances played on
the Yamaha Tyros keyboard. I often add files so check back regularly!

The albums in Technics format formerly on my website are still
available upon request.

----- Original Message ----- 
From: "William Stephan" <wstep...@everestkc.net
<mailto:wstephan%40everestkc.net> >
To: <blindhandyman@yahoogroups.com <mailto:blindhandyman%40yahoogroups.com>
>
Sent: Saturday, August 07, 2010 12:40 PM
Subject: RE: [BlindHandyMan] "Easy to Assemble! Takes only 20 minutes"

> Lenny: I remember those pedal cars, though I never had one. We use do
> steal your sister's roller skates, which were metal then, and screw thm to
> each end of a 8 x 1 plank. Then we'd mount a wooden crate on the front 
> and
> put handles on it. It was a great scooter and roared like a jet on
> concrete. Maybe all the children have segways these days, I don't know.
>
>
>
> -----Original Message-----
> From: blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com>
[mailto:blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com> ]
> On Behalf Of Lenny McHugh
> Sent: Saturday, August 07, 2010 14:04
> To: blindhandyman@yahoogroups.com <mailto:blindhandyman%40yahoogroups.com>

> Subject: Re: [BlindHandyMan] "Easy to Assemble! Takes only 20 minutes"
>
>
>
>
>
> Some great memories of Christmas Eve. Still, there will never be a
> replacement for the old individual owned hardware/toy stores. When I was 
> old
>
> enough to help assemble toys for my younger brothers and sisters there was
> one hardware store from which my parents purchased everything. There was
> more than one year where putting something together we discovered that 
> there
>
> was a missing part. I remember my dad calling the owner at 1 or 2 in the
> morning. Fran would say drive out the parts will be in a bag at the side
> door. He did that for everyone not just my dad. With support like that
> everyone that we knew only purchased from Saures' hardware. I sure do miss
> that store. Around 1960 we put two Scat cars together for my brothers.
> These were peddle cars that now remind you of a go-cart. Sure wish we 
> still
> had them, last week on the History Channel there was a program about
> antiques. These cars now sell from $1,200 to $1,500.
> --------------------------------------------------
> From: "Alan Paganelli" <alanandsuza...@earthlink.net
<mailto:alanandsuzanne%40earthlink.net> 
> <mailto:alanandsuzanne%40earthlink.net> >
> Sent: Saturday, August 07, 2010 2:43 PM
> To: <blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com>  
> <mailto:blindhandyman%40yahoogroups.com>
>>
> Subject: [BlindHandyMan] "Easy to Assemble! Takes only 20 minutes"
>
>> LLOL! when I was married to my first wife, we bought a tricycle for her.
>> All I got was a box of metal parts and on the box it said "Easy to
>> Assemble!
>> Takes only 20 minutes" More like 20 days! There I am on Christmas Eve On
>> the back of the tricycle were 2 steps to get up to the plastic seat. The
>> holes for the second step were missing I mean not even there so here I am
>> with only a power drill and the damn tricycle made of steal. There was
>> some
>> other toy to assemble as well. I don't remember what it was but I
>> finished
>> the job about 5 minutes before my 3 year old daughter woke up and ready
>> for
>> some serious Christmas present opening. I remember she was very happy
>> with
>> her bike and road it all over the house that morning. I think every body
>> who has kids has at least one story like that. I was so torked off that
>> the
>> damn holes weren't even there and the second step was actually a
>> reinforcement peace as well so I couldn't just leave it off.
>>
>> There was a swing set that Suzanne bought for the kids at Toys are us. I
>> couldn't see what it looked like because I didn't go with her so she says
>> I'll read the instructions to you over the phone if you get stuck. You've
>> seen swing sets before. How hard can it be to put a kids swing set
>> together. LOL! It took me 4 days but in the end, there were 3 A-frame
>> supports, 2 regular seats, a trapeze, a sea saw and a 4 kid glider plus a
>> slide attached to one of the A-Frames. I think my oldest was almost 20
>> when
>> that swing set got pitched. Every kid in 2 miles had played on it at one
>> time or another. There were ruts in the ground from kids shoes and that's
>> some trick in the desert where the ground is as hard as concrete.
>>
>> Alan
>>
>> Please click on: http://www.home.earthlink.net/~alanandsuzanne/
>> There, you'll find files of my arrangements and performances played on
>> the Yamaha Tyros keyboard. I often add files so check back regularly!
>>
>> The albums in Technics format formerly on my website are still
>> available upon request.
>>
>> ----- Original Message ----- 
>> From: "Cy Selfridge" <cyselfri...@comcast.net
<mailto:cyselfridge%40comcast.net> 
> <mailto:cyselfridge%40comcast.net> >
>> To: <blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com> 
> <mailto:blindhandyman%40yahoogroups.com> >
>> Sent: Saturday, August 07, 2010 7:00 AM
>> Subject: RE: [BlindHandyMan] Buying a new Bed?
>>
>>
>>> Alan,
>>>
>>> My good friend, let me tell you a very short tale of woe about 
>>> assembling
>>> items.
>>>
>>> One Christmas we purchased a doll stroller for our daughter and it
>>> *CLEARLY*
>>> stated that "simple household tools required". Now, that is one of the
>>> most
>>> deceptive and misleading statements which could be used by any purveyor
>>> of
>>> goods. (LOLLOLLOL)
>>>
>>> We did see the finished product at Toys Are Us so we felt confident that
>>> success would be forthcoming.
>>>
>>> Much to our (particularly mine) dismay nothing quite lined up correctly.
>>> Of
>>> course, it was Christmas Even when this discovery was made. Fortunately 
>>> I
>>> still had a tap and dye set and could make holes where holes needed to
>>> be.
>>> It took about 4 hours and quite a bit of Wild Turkey to assemble the
>>> wonderful little thing and I do not think "wonderful" was one of the
>>> words
>>> I
>>> used to describe it. (LOLLOLLOL)
>>>
>>> Cy, The Anasazi
>>>
>>>
>>>
>>> From: blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com> 
> <mailto:blindhandyman%40yahoogroups.com>
>>> [mailto:blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com> 
> <mailto:blindhandyman%40yahoogroups.com> ]
>>> On Behalf Of Alan Paganelli
>>> Sent: Saturday, August 07, 2010 7:28 AM
>>> To: blindhandyman@yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com> 
> <mailto:blindhandyman%40yahoogroups.com>
>>> Subject: Re: [BlindHandyMan] Buying a new Bed?
>>>
>>>
>>>
>>>
>>>
>>> Claudia,
>>>
>>> We have a metal bed frame that is standard or queen. The queen is 6
>>> inches
>>> wider then the standard with 3 inches on a side and the length is the
>>> same.
>>> Where the head board would be on the frame isa plate with holes in it.
>>> This
>>> plate holds the box spring esembly from shooting off the other end. When
>>> you buy a head board, there are holes in it that line up with those 
>>> holes
>>> on
>>>
>>> the plate and hold the head board firmly in place. You can move the bed
>>> for
>>> cleaning because the plates on either side hold the head board up off 
>>> the
>>> floor a bit so you can move it.
>>>
>>> Some frames can be adjusted to standard or queen. Others are queen and
>>> can
>>> be adjusted to king but the most popular size is queen.
>>>
>>> The kind of head board your talking about from Wal-Mart should mention 
>>> in
>>> the add what size bed it fits. If you have a queen, then make sure you
>>> get
>>> a queen etc. Putting them together is childs play. If I can see what it
>>> looks like, I can put it together. My wife and I will go down to the
>>> store
>>> and she'll show me what she wants. I'll look it over real good and when
>>> we
>>> get it home, I can put most things together and the ones I have trouble
>>> with
>>>
>>> my sighted wife is there to read the instructions.
>>>
>>> We bought one of those kinds of head boards. Putting one together was
>>> pretty simple. Any bed frame you buy will accomidate a head board but
>>> given
>>> what you described, you don't need a new frame, just the head board.
>>>
>>> HTH
>>>
>>> Alan
>>>
>>>>> >
>>>>> >Okay,
>>>>> >
>>>>> >I need some explanation here.
>>>>> >We have a queen-sized bed that sits on a metal
>>>>> >frame with wheels. The bed has both its matress and box spring!
>>>>> >The headboard is what's called a bookcase style.
>>>>> >It's the width of the bed, with shelves on each
>>>>> >side and an open space in the middle.
>>>>> >We'd like a similar set-up for the new bed.
>>>>> >
>>>>> >However, we've been hunting, and this is what
>>>>> >we've found. The beds don't seem to have metal
>>>>> >or iron frames anymore; they seem to have a wood
>>>>> >base or frame. I'm wondering if we can connect a
>>>>> >headboard to this type of bed or not?
>>>>> >
>>>>> >As I said, the current frame is on wheels, so
>>>>> >that gives the bed some height; we need
>>>>> >something that's a little lower to the ground,
>>>>> >so it seems that wood frames are the way to go.
>>>>> >But, again, we also want this book case style
>>>>> >headboard, and they're difficult to find.
>>>>> >Walmart has one by Sauder that we can put
>>>>> >together, and this is what I'm thinking of doing.
>>>>> >
>>>>> >Is it logical that you can purchase a bed frame
>>>>> >separately from the bed itself? Am I right in
>>>>> >thinking that you can't connect headboards to
>>>>> >wooden frames? And if I'm wrong on this, how is
>>>>> >this done? Would it be by drilling holes into
>>>>> >the frame and screwing the headboard to it?
>>>>> >I'm not sure if this is making any sense, but
>>>>> >since I don't have any sight, all of what I'm
>>>>> >picturing here has been things that I've only been able to touch!
>>>>> >
>>>>> >Claudia
>>>
>>>
>>>
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Send any questions regarding list management to:
>>> blindhandyman-ow...@yahoogroups.com
<mailto:blindhandyman-owner%40yahoogroups.com> 
> <mailto:blindhandyman-owner%40yahoogroups.com>
>>> To listen to the show archives go to link
>>> http://www.acbradio.org/pweb/index.php?module=pagemaster
> <http://www.acbradio.org/pweb/index.php?module=pagemaster
<http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_
> &PAGE_user_op=view_
> page&PAGE_id=33&MMN_position=47:29>
> &PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
>>> Or
>>> ftp://ftp.acbradio.org/acbradio-archives/handyman/
>>>
>>> The Pod Cast address for the Blind Handy Man Show is.
>>> http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
>>>
>>> Visit the archives page at the following address
>>> http://www.mail-archive.com/blindhandyman@yahoogroups.com/
>>>
>>> For a complete list of email commands pertaining to the Blind Handy Man
>>> list just send a blank message to:
>>> blindhandyman-h...@yahoogroups.comyahoo
<mailto:blindhandyman-help%40yahoogroups.comYahoo> 
> <mailto:blindhandyman-help%40yahoogroups.comYahoo> ! Groups Links
>>>
>>>
>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> Send any questions regarding list management to:
>> blindhandyman-ow...@yahoogroups.com
<mailto:blindhandyman-owner%40yahoogroups.com> 
> <mailto:blindhandyman-owner%40yahoogroups.com>
>> To listen to the show archives go to link
>> http://www.acbradio.org/pweb/index.php?module=pagemaster
> <http://www.acbradio.org/pweb/index.php?module=pagemaster
<http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_
> &PAGE_user_op=view_
> page&PAGE_id=33&MMN_position=47:29>
> &PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
>> Or
>> ftp://ftp.acbradio.org/acbradio-archives/handyman/
>>
>> The Pod Cast address for the Blind Handy Man Show is.
>> http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
>>
>> Visit the archives page at the following address
>> http://www.mail-archive.com/blindhandyman@yahoogroups.com/
>>
>> For a complete list of email commands pertaining to the Blind Handy Man
>> list just send a blank message to:
>> blindhandyman-h...@yahoogroups.comyahoo
<mailto:blindhandyman-help%40yahoogroups.comYahoo> 
> <mailto:blindhandyman-help%40yahoogroups.comYahoo> ! Groups Links
>>
>>
>>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Send any questions regarding list management to:
> blindhandyman-ow...@yahoogroups.com
<mailto:blindhandyman-owner%40yahoogroups.com> 
> To listen to the show archives go to link
> http://www.acbradio.org/pweb/index.php?module=pagemaster
<http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_
page&PAGE_id=33&MMN_position=47:29>
&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
> Or
> ftp://ftp.acbradio.org/acbradio-archives/handyman/
>
> The Pod Cast address for the Blind Handy Man Show is.
> http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
>
> Visit the archives page at the following address
> http://www.mail-archive.com/blindhandyman@yahoogroups.com/
>
> For a complete list of email commands pertaining to the Blind Handy Man 
> list just send a blank message to:
> blindhandyman-h...@yahoogroups.comyahoo
<mailto:blindhandyman-help%40yahoogroups.comYahoo> ! Groups Links
>
>
>
> 





[Non-text portions of this message have been removed]

Reply via email to