> Are the risks and tradeoffs well enough understood (and visible enough > for troubleshooting) to recommend broader deployment? > > I recently gave openwrt a try on some hardware that I ultimately > concluded was insufficient for the job. Fairly soon after changing out > my access point, I started getting complaints of Wi-Fi dropping in my > household, especially when someone was trying to videoconference. I > discovered that my AP was spontaneously rebooting, and the box was > getting hot.
Most CPE devices these days rely on hardware accelerated packet forwarding to achieve their published specs. That's all about taking packets in one side and pushing them out the other as quickly as possible, with only minimal support from the CPU (likely, new connections get a NAT/firewall lookup, that's all). It has the advantages of speed and power efficiency, but unfortunately it is also incompatible with our debloating efforts. So debloated CPE will tend to run hotter and with lower peak throughput, which may be noticeable to cable and fibre users; VDSL (FTTC) users might have service of 80Mbps or less where this effect is less likely to matter. It sounds like that AP had a very marginal thermal design which caused the hardware to overheat as soon as the CPU was under significant load, which it can easily be when a shaper and AQM are running on it at high throughput. The cure is to use better designed hardware, though you could also contemplate breaking the case open to cure the thermal problem directly. There are some known reliable models which could be collected into a list. As a rule of thumb, the ones based on ARM cores are likely to be designed with CPU performance more in mind than those with MIPS. Cake has some features which can be used to support explicit classification and (de)prioritisation of traffic via firewall marking rules, either by rewriting the Diffserv field or by associating metadata with packets within the network stack (fwmark). This can be very useful for pushing Bittorrent or WinUpdate swarm traffic out of the way. But for most situations, the default flow-isolating behaviour already works pretty well, especially for ensuring that one computer's network load has only a bounded effect on any other. We can discuss that in more detail if that would be helpful. _______________________________________________ Bloat mailing list [email protected] https://lists.bufferbloat.net/listinfo/bloat
