JJZolx wrote: > I'm talking about the outer foam ring shown in the photo that is affixed > to the basket. Was that not on the drivers that you received?
I recently refoamed my Boom's bass drivers. Removing the drivers from the front baffle leaves a foam/rubber? ring (similar to the one in the picture you provided) attached to the front baffle, I don't know if they were glued or not, but a gentle pull in various places resulted in no movement, so I left them alone, replaced the repaired drivers and all is good. If the 3FE25s come with a foam ring as in your picture, I'm not sure it would be necessary/advisable to use them without removing the original. The original drivers appear to be deeper than the 3FE25s and have a further foam/rubber ring glued to the rear of the magnet housing, and when assembled fit tight up against a reinforced moulding on the back of the Booms cabinet, so the drivers/cabinet is braced front to back. The replacement drivers are possibly just hanging off the front baffle. I don't know if this is a good or bad point, just a heads up. +-------------------------------------------------------------------+ |Filename: Pic05.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=20402| +-------------------------------------------------------------------+ kidstypike LMS on Raspberry Pi 3/max2play/HiFiBerry DAC+ > AVI DM5 1 x SB3 - 1 x Boom - 1 x (Squeezebox) Radio - 2 x Touch - 2 x Raspberry Pi/max2play/HiFiBerry ------------------------------------------------------------------------ kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=105534 _______________________________________________ Boom mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/boom
