Dear brailleNote Listserv, I just received a new embosser, the Tiger Max. This is the embosser that is able to emboss both standard Braille and in additional do graphics. Of course, the graphic portion of it would need to be done using a PC, as the BrailleNote does not support graphics, because of the filteration of the KeySoft platform.
Here is the problem I am having with the Tiger Max embosser. I am able to use the drivers and such that came with the embosser to install it onto my laptop and have the two devices up and running. By the way I am using a USB to parallel converter that came with the embosser, I am assuming it is the one that HumanWare also sells. When I plug the USB portion into the BrailleNote, I get the message "card not recognize," I still get this message after performing a reset. I also tried unplugging the parallel portion from the embosser so only the USB portion is connected to the BrailleNote, I still get that same exact message, "card not recognized." I thought that the purpose of the USB to parallel converter is to have the ability to use devices that still use parallel ports via the USB port. If anyone has also encountered this issue and have successfully found some sort of work-around, it would be greatly appreciated if you do share your word of wisdom. Thank you, awating your response. Kevin ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
