Some time ago I purchased the socket low power ethernet card from Humanware. When it arrived, it wasn't in any kind of package and had no documentation. Tomorrow I am picking up a router and going to hook my VoiceNote up using the ethernet cable and have some questions. I have some of the messages posted in the past on how to establish and fill in the connection configuration details. My questions are more on the hardware side of things. 1. Do I plug the socket ethernet card in while the VoiceNote is turned on or should it be inserted before turning on the VN? 2. Should the ethernet cable be hooked to the router hub the first time I do the setup of the ethernet card or do I do the card configuration step first and then later hook to the router? 3. When I get done with that connection and am ready to remove the ethernet card, should I first turn the VN off or can the card be removed while the unit is still on? 4. I think I remember someone suggesting that a reset be done after removing either the ethernet card or a wireless card. If true, what kind of reset should this be, a simple one or one with other keys held down? 5. I'm purchasing a NetGear router and would appreciate any words of wisdom any of you gurus can offer to reduce frustrations I might run into. Thanks in advance for any help. Richard Ehrler
___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
