I paste below a small portion of the mPower upgrade instructions. Installing the Bootloader 1. Press and hold dots 4 and 6 on the Braille keyboard (keys J and L on the QWERTY), and press the reset button on the left side of the unit, just behind the on/off switch. Keep holding down dots 4 and 6 (keys J and L on the QWERTY) until you hear 5 rising tones, at which point you can release the held down keys. 2. On a Braille keyboard press dots 1 and 2 (the letter B) or on a QWERTY keyboard type the digit 2 on the number row.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karyn Campbell Sent: Thursday, September 13, 2007 10:22 PM To: Braillenote Discussion List Subject: [Braillenote] SD card error Richard, >From all of the instructions I have seen on this list, you want to do a >JK reset, not a JL reset. Maybe this is your problem. Hope this helps. Karyn Campbell, Illinois USA, [EMAIL PROTECTED] VN QT M Power user running 7.2 B 47 Check out my Blog at packerbrat.livejournal.com No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.487 / Virus Database: 269.13.16/1005 - Release Date: 9/13/2007 11:45 AM ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
