Hi,
Nice ideas, and perhaps I'll try that next time. I called HW tech support
just to get their opinion, and while I was shooting the breeze with them I
tried another service reset. That time it worked. Go figure. So on the
face of it it seems not to be a hardware issue after all.
Tom
----- Original Message -----
From: "John Patrick Houck" <[EMAIL PROTECTED]>
To: "Tom Lange" <[EMAIL PROTECTED]>
Sent: Wednesday, October 08, 2008 11:07 AM
Subject: re: [Braillenote] FM Radio Question
Hello Tom, more then likely it is a hardware issue. The only other thing
I can think of trying to see if it's a software problem is to reinstall
your current version of Keysoft. Good luck.
Sincerely,
John
----- Original Message -----
From: "Tom Lange" <[EMAIL PROTECTED]
To: "BrailleNote List" <[email protected]
Date sent: Wed, 8 Oct 2008 05:49:12 -0700
Subject: [Braillenote] FM Radio Question
Hi all,
Until fairly recently, the FM radio on my BN mPower BT32 has
worked, sort of. That is to say, I can dial in certain frequencies and
get some marginal reception. Last night, as I was creeping down the
freeway on my way home, I fired up the FM radio in hopes of picking up a
station that might have been broadcasting the presidential debate. When
the FM radio came on, the frequency being shown was 0.2, and there was no
way to dial in a frequency using the typical commands, and, although I was
able to enter a frequency number, nothing changed. I tried a 4-5-6 reset
and a service reset with no luck. Is this a hardware issue? I remember
this problem being reported a long time ago but didn't pay attention to
it. Can anyone tell me what's up?
Thanks.
Tom
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
