Hi,
The only way out is via booting to bootloader, disable Debug mode
and restarting KeySoft (Reset with DOTS 4-6, DOT 2 then Reset
button).
The reason that I said that message was a misconception that
debugging will solve all of our problems and resource allocation
(using serial port to view output information).
Cheers,
Joseph
----- Original Message -----
From: "Nicole B. Torcolini" <[email protected]
To: "Joseph Lee" <[email protected]>,"Brandon"
<[email protected]>,"BrailleNote List"
<[email protected]
Date sent: Mon, 31 May 2010 18:02:39 -0700
Subject: Re: [Braillenote] eloquence discovery
Interesting. Any way out once you are in it?
----- Original Message -----
From: "Joseph Lee" <[email protected]
To: "Brandon" <[email protected]>;
<[email protected]>;
"BrailleNote List" <[email protected]
Sent: Monday, May 31, 2010 4:12 PM
Subject: re: [Braillenote] eloquence discovery
Hi,
When you use Debug mode, the information about your BrailleNote
and what
it is doing will be sent out through the serial port. Other
things that
uses serial port, such as Braille Terminal mode will not work
through the
serial port. If you use Debug mode and attempt to use braille
terminal
via serial port results in the following message from the
BrailleNote:
"The serial port is not availible."
As for deeper meaning behind this, I think it'd be somewhat hard
for you
to understand - can someone help me out here?
Cheers,
Joseph
----- Original Message -----
From: Brandon <[email protected]
To: Joseph Lee <[email protected]
Date sent: Mon, 31 May 2010 18:22:05 +1200
Subject: re: [Braillenote] eloquence discovery
What do you mean?
Can you give me an example?
I did the reset and turned debug off then did a normal reset.
Can you explain please?
Thanks!
Cheers,
Brandon
----- Original Message -----
From: Joseph Lee <[email protected]
To: Brandon <[email protected]>,
[email protected]
Date sent: Mon, 31 May 2010 15:00:34 -0700
Subject: re: [Braillenote] eloquence discovery
Hi,
Be warned: IF YOU DO THIS, YOU'LL NOT BE ABLE TO USE SERIAL
PORT!!!
----- Original Message -----
From: Brandon <[email protected]
To: [email protected]
Date sent: Mon, 31 May 2010 13:51:52 +1200
Subject: [Braillenote] eloquence discovery
Hi. I made a discovery with the issue I asked about. If you
don't want to follow my advice you don't have to, I just figured
something out though that might help users of eloquence speech
on
their bn mpower. Perform a reset with dots 4-5 held down. You
don't need the ac adapter to do this even though it says connect
ac adapter. Don't have an sd card or any media inserted into
the
unit when doing this.
Press dot 2 on its own when you see update menu v2.6. The
braille will show degug on. Press d and it will show debug
start
and you'll be returned to the main menu as if you had just done
a
normal reset. Wait 5 seconds before pressing spacebar to move
through the menu.
Remember I would only recommend this with eloquence if it really
is being sluggish.
Cheers,
Brandon
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
