Hello list: We certainly do support Activesync over an Ethernet connection and have done since the implementation of this functionality.
>From KeySoft 6.0 onwards, it should no longer be necessary for anyone to use the BNIP config program, as all the adjustable parameters can be set when creating a new connection configuration. However, BnIP config will still work should you wish to use this method for any reason, though obviously from a support perspective, this is no longer the recommended method. Regards, Dean Jackson Customer/Technical Analyst Humanware DDI: +64 3 373 6184 Fax: +64-3-384 4933 Email: [EMAIL PROTECTED] Internet: www.humanware.com Skype: pulsedata-support-nz__________________________ ----- Original Message ----- From: "Don Bishop" <[EMAIL PROTECTED]> To: "Braillenote List" <[email protected]> Sent: Tuesday, May 24, 2005 2:28 PM Subject: RE: [BrailleNote] ActiveSync not working any more > Hi Jeff, > > It's interesting you say that you have problems with ethernet activesync as I've used it almost exclusively for over a year. > > It's always worked quite well for me and I found it also significantly faster than via serial connection. The only thing is that you need to be sure to establish a > partnership using the serial connection first and then disconnect, and change the connection settings in activesync to ignore the serial port and to look at > the network. > > Also you have to program the bn using bnipconfig.exe with the address info from the computer you want to connect to. > > Sounds complicated to explain, but it's really easy after you've done it a few times. But, with 6.1, it's nice just to plug in wireless and go. <grin> > > Don > > On Mon, 23 May 2005 19:21:22 -0500, Jeff Molzow wrote: > > Hey Dan: > > The other thing I'd try is to go into the utilities miscellaneous menu and > cycle through the communications ports to be used for ActiveSync. Remember, > you need to make the connection on the serial port first before attempting > to connecting on infra-red or via the network. I've never been able to get > Ethernet Active Sync to work correctly for very long and I don't know if > Humanware supports Active Sync via Ethernet anyway. . > > I also just checked the Microsoft site and the Latest version of Active Sync > available for Windows is version 3.8. I'm not sure what utility your using > that has a version 7.x something. > > hth > Jeff > > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote > > > > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote >
