Hi All, Today I changed the over pressure safety valve on the steam boiler (1.8 bar cert.), as it was leaking- the heating element switched on and off every 10 seconds, and steam pressure was around 0.9-1 bar. I am now *fairly* confident there Isn't a leak (happy days). My question is, where should the steam pressure sit, and how long should the interval be between the heating element going on and off? I'm concerned the element is still cycling too often - on at 0.8 bar (steam gauge reading) for 2-3 seconds, pressure rises to 1.2 bar, and then falls to 0.8 bar in 30ish seconds. (All at rest 40 mins after start up).
Appreciate anyones thoughts, comments and experiences- especially timings between steam boiler element cycling off and on! Thanks, Will -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/08324e18-3c68-4b97-ac3f-33584e828822n%40googlegroups.com.
