[quoted lines by Michel Such on 2008/10/27 at 16:34 +0100] >brltty.exe: Loading Papenmeier configuration file: >C:/brltty-3.10/bin/../etc/brltty/brltty-pm.conf >brltty.exe: Probing Papenmeier display at 19200 baud. >brltty.exe: device directory: >brltty.exe: serial device opened: COM2: fd=1852 >brltty.exe: Write: 02 53 00 00 00 00 03 >brltty.exe: Write: 02 42 50 50 03
For the Papenmeier driver you'll need to pass in a couple of driver parameters. You can do this with the following option (the B is uppercase): -Bdebugreads=yes,debugwrites=yes I'm sorry I forgot to tell you about them earlier. -- Dave Mielke | 2213 Fox Crescent | The Bible is the Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | May 21, 2011, is Judgement Day. EMail: [EMAIL PROTECTED] | Canada K2A 1H7 | October 21, 2011, is the End. http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
